User manual LG GR-L248NN

[. . . ] Do NOT insert anything between the air flow blades, as the inner fan may be damaged and you may be hurt. Keep children away from the indoor unit. Do NOT place any obstacles in front of the outdoor unit. If the remote control will not be used for a long time, remove the batteries. [. . . ] N o t e You can change modes at any time. Result: MODE . MODE TURBO OFF 3 To adjust the temperature, press the or buttons one or more times until the required temperature is displayed. Possible temperatures are between 18°C and 30°C inclusive. Result: x Each time you press or : - The temperature is adjusted by 1°C - The indoor unit beeps x The air conditioner starts cooling, provided that the room temperature is higher than the selected temperature; the fan will, however, operate. MODE TURBO OFF 4 Select the fan speed by pressing the until the required setting is displayed: Low Medium High Automatic Result: Each time you press button one or more times , the indoor unit beeps. 5 To control the direction of the air flow, refer to page 15. E-10 Heating Your Room You must select the Heat mode if you wish to adjust the: x Heating temperature x Fan speed when heating 1 If necessary, press the Result: (On/Off) button. ENGLISH x The OPERATION indicator on the indoor unit comes on. x The air conditioner starts up in the mode selected when the unit was last used. x The air conditioner starts up in the mode selected when the unit was last used. Result: x The temperature and fan settings are adjusted automatically. x The TURBO indicator on the indoor unit lights up. x The air conditioner cools or heats the room as quickly as possible. x After 30 minutes, the air conditioner is reset automatically to the previous mode, temperature and fan settings. but, if you press the TURBO button in or mode that is changed with mode automatically. Downwards. ENGLISH E-15 RECOMMENDATION 2 If you want the blade to move up and down automatically when the air conditioner is operating, press the button. Result: The blade move up and down, around the base position set. To stop the blade moving up and down, press the button again. 3 Note If you switch the air conditioner. . . Reset to the position that you previously selected. Adjusting the Air Flow Direction Horizontally There are two sets of inner air flow blades. Just as the outer air flow blade can be adjusted vertically, the inner blades can be adjusted horizontally. 1 Open the air flow blade along the bottom of the indoor unit, by pressing the button. To stop the blade moving up and down, press the button again. 2 3 Adjust each set of inner blades to the required position, by pushing or pulling them sideways. Switching the Unit On and Off Automatically (On/Off Timer) You can set the timer to switch the air conditioner on and/or off automatically at given times. Example: You wish to start cooling your room before you return from work; you decide to: x Switch the air conditioner on at 5:30 p. m. You can set: x The switch-on time only x The switch-off time only x Both the switch-on and switch-off times IM IMPORTANT Check that the current time is correct before setting the timer; if it is not correct, refer to page 8 for details on how to set it. (On/Off) button. 1 2 If necessary, press the Select the required mode by pressing the MODE button on the remote control one or more times until the appropriate indication appears (in the above example, ). Press the Result: Note button under the cover on the remote control. [. . . ] Problem The air conditioner does not operate at all Explanation/Solution x Check that the breaker used for the air conditioner is switched on. x Check that the OPERATION indicator on the indoor unit is on; if necessary press (On/Off) on the remote control. x Check whether the TIMER indicator on the indoor unit is switched on. If so: - Wait until the switch-on time is reached and the air conditioner starts up automatically - Cancel the timer (see page 19 for further details) x Check that there are no obstacles between you and the indoor unit. [. . . ]