User manual LG GR-P207PGG

[. . . ] Do not use any combustible equipment in front of the airflow outlet. Do not expose directly to cold air for a long period. Do not share the same power outlet with other equipment. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. [. . . ] However, in order to further protect your air conditioner from being damaged by abnormally strong lightning activity, you may want to disconnect it from the power supply. Do not touch the air conditioner during lightning, it may cause electric shock. Do not sit or step on the unit, you may fall down accidentally. Do not touch the sharp aluminium fin, sharp parts may cause injury. After long periods of use, make sure the installation rack is not damaged. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. Use this air conditioner under the following temperature range Indoor Outdoor *DBT *WBT *DBT *WBT Maximum 32 23 43 26 COOLING Minimum 16 11 16 11 Maximum 30 24 18 HEATING Minimum 16 -15 -6 NOTICE: · When the outdoor temperature is out of the above temperature range, the heating capacity will drop significantly and outdoor unit might stop for protection control. QUICK GUIDE BACK COVER NOTE : The illustrations in this manual are for explanation purposes only and may differ from the actual unit. It is subjected to change without notice for future improvement. These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. cOOL mode - To enjoy cool air DRY mode - To dehumidify the environment · Unit operates at low fan speed to give a gentle cooling operation. When ON Timer is set, the unit may start earlier (up to 35 minutes) before the actual set time in order to achieve the desired temperature on time. If timer is cancelled manually or due to power failure, you can restore the previous setting (once power is . For AUTO, the indoor fan speed is automatically adjusted according to the operation mode. In heat mode, the air blows horizontally for a while, then starts to blow downwards. Use curtains to screen off sunlight and outdoor heat to reduce power consumption during cool mode. Switch off the power supply before cleaning. Do not touch the aluminium fin, sharp parts may cause injury. hINT · To ensure optimal performance of the unit, cleaning maintenance have to be carried out at regular intervals. Dirty unit may caused malfunction and you may retrieve error code "H99". Raise and pull to remove the front panel. [. . . ] Dry the filters thoroughly under the shade, away from fire or direct sunlight. TURN OFF POWER SUPPLY then please consult authorized dealer under the following conditions: · Use Auto OFF/ON button to select Cooling/Heating operation, after 15 minutes of operation, it is normal to have the following temperature difference between air inlet and air outlet vents: Cooling: 8°C Heating: 14°C Activate Heat mode for 2~3 hours to remove moisture left in the internal parts thoroughly to prevent mould growth. The following symptoms do not indicate malfunction. This may due to damp smell emitted by the wall, carpet, furniture or clothing. [. . . ]