User manual LG GR-S5920

[. . . ] (Only supported in Analog Mode) The best display mode : 1920 x1080 VOLUME (Only HDMI mode) Adjust the volume of the Monitor set. (See p. 14) INPUT You can choose the input signal. yy When two input signals are at least are connected, you can select the input signal (D-SUB/HDMI) you want. yy When only one signal is connected, it is automatically detected. Power Indicator The power indicator stays white color if the display is running properly (On Mode). [. . . ] yy DVI OUT When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution. (Only supported in Analog Mode) 10 CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS ENGLISH ENG Accessing The Main Menus 1 Press any button on the stand base of the Monitor set to display the MONITOR SETUP OSD menu. 3 Change the value of the menu item by pressing the buttons on the stand base of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button. 4 Select EXIT to leave the OSD menu. Stand base of the Monitor set Buttons MENU (See p. 11) Sets the screen options. AUTO (See p. 5) Optimizes the resolution. EXIT Exits the OSD menu. MONITOR SETUP MENU SUPER+ SUPER RESOLUTION ENERGY SAVING AUTO VOLUME INPUT EXIT SUPER+ RESOLUTION (See p. 14) SUPER ENERGY SAVING (See p. 15) VOLUME (See p. 14) INPUT Sets the external input. NOTE Different menu items are enabled depending on the type of input signal. Menu GR-S5920 GR-S5920 (Only HDMI Mode) ● ● SUPER+ RESOLUTION ● ● SUPER ENERGY SAVING ● ● AUTO VOLUME INPUT ● ● ● ● EXIT ● ● CUSTOMIZING SETTINGS 11 Customizing Settings Menu Settings 1 Press any button on the stand base of the Monitor set to display the MONITOR SETUP OSD menu. ENG ENGLISH MENU BRIGHTNESS ORIGINAL RATIO COLOR PRESET BLACK LEVEL LANGUAGE SOUND RTC POWER INDICATOR BUTTON INDICATOR DUAL PACKAGE FACTORY RESET 100 WIDE WARM LOW ENGLISH ON ON ON ON NO EXIT EXIT 2 Press the MENU button to display the options in the OSD menu. 3 Set the options by pressing the ◄ or ► or ▼ buttons. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. The available MENU settings are described below. Menu BRIGHTNESS ORIGINAL RATIO ● ● Analog ● HDMI ● WIDE Description Adjusts the brightness of the screen. Switch to full screen mode according to input image signal. ORIGINAL Change the input image signal ratio to original. * This function works only if input resolution is lower than Monitor set ratio (16:9). yy WARM: Set the screen to warm color temperature (more red). yy MEDIUM: Set the screen to medium color temperature. yy COOL: Set the screen to cool color temperature (More blue). In the General mode, the SUPER+ RESOLUTION is turned off. When the user wants a natural video screen with soft image, it helps to get the optimized screen. It is effective for video with small movement or still image. LG calculated these values by using “broadcast video signal”. yy LED Saving means how much power can be saved using a WLED Panel instead of CCFL panel. yy SUPER SAVING means how much power can be saved using the SUPER ENERGY SAVING yy function. 16 TROUBLESHOOTING TROUBLESHOOTING Check the following before calling for service. No image appears Is the power cord of the display connected?Is the power indicator red? ENGLISH ENG Do you see an "OUT OF RANGE" message on the screen? Do you see a "CHECK SIGNAL CABLE" message on the screen? y y Check and see if the power cord is connected properly to the power outlet. y y If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. y y This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this manual and configure your display again. y y This message appears when the signal cable between your PC and your display is not connected. [. . . ] y y Set the color setting higher than 24 bits (true color) at Control Panel ► Settings. y y Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?Have you installed the display driver? y y Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www. lg. com. [. . . ]