User manual LG GR-T282GEASGQFLY

[. . . ] x When moving, consult authorized service personnel for disconnection and installation of the unit. x Do not become over-exposed to cold air by staying in the direct path of the airflow of the air conditioner for extended periods of time. x Do not insert fingers or objects into the outlet port or intake grilles. x Do not start and stop air conditioner operation by disconnecting the power supply cord and so on. [. . . ] Confirm if any obstacles that may prevent the air flow are present near the air conditioner. IMPORTANT ON To operate the unit, the power switch is fitted to the wall must be set to ON. E-8 Cooling Your Room ENGLISH You must select the Cool mode if you wish to adjust the : x Cooling temperature x Fan speed when cooling 1 If necessary, press the Result: button. x The air conditioner starts up in the Cool mode. x The indoor unit beeps. IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: x Plugged in x Stopped lt will start up normally after three minutes. 2 If the is not displayed at the top of the remote control, press the on the remote control one or more times until it appears. Result: Note x The indoor unit beeps each time you press the x The air conditioner runs in the Cool mode. You can change modes at any time. button button. C 3 To adjust the temperature, press the button one or more times until the required temperature is displayed. Possible temperatures are between 18OC and 30OC inclusive. Result: x Each time you press the button: - The temperature is adjusted by 1OC. x The air conditioner starts cooling, provided that the room x temperature is higher than the selected temperature. C 4 Select the fan speed by pressing the the required setting is displayed : Automatic(rotated : Low Medium High Result: x Each time you press the button one or more times until ) C button, the indoor unit beeps. 5 To control the direction of the air flow, refer to page 17. E-9 Selecting the Automatic Operating Mode You can start the air conditioner in the Automatic mode from your remote control. In the Automatic mode, the temperature and the optimum fan speed is selected automatically. 1 If necessary, press the Result: button. x The air conditioner starts up in the Cool mode. x The indoor unit beeps. IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: x Plugged in x Stopped lt will start up normally after three minutes. 2 If the is not displayed at the top of the remote control, press the on the remote control one or more times until it appears. Result: Note x The indoor unit beeps each time you press the x The air conditioner runs in the Auto mode. Result: x Each time you press the button: - The temperature is adjusted by 1OC. x The air conditioner starts removing the excess humidity; x the quantity of air is adjusted automatically. 4 To control the direction of the air flow, refer to page 17. E-13 Airing Your Room If the atmosphere in your room is stale, you can air the room using the Fan feature. 1 If necessary, press the Result: button. x The air conditioner starts up in the Cool mode. Since it is an additional function, you can select it in any mode, even when the air conditioner is turned off. 1 Press the Result: button. x The air conditioner starts up in the Clean mode. x The indoor unit beeps. Note If you press the button during unit off, it will turn on automatically and clean air in the Fan mode. 2 If you wish to stop the Cleaning function, press the Result: button again. x The air conditioner is reset automatically to the previous mode, temperature and fan settings. 3 To control the direction of the air flow, refer to page 17. E-16 Adjusting the Air Flow Direction Vertically ENGLISH Depending on the position of the indoor unit your room, you can adjust the position of the outer air flow blade on the upper part of the unit, thus increasing the efficiency of the air conditioner. 1 Press the Result: button. Upwards. RECOMMENDATION 2 To stop the blade moving up and down, press the button again. Adjusting the Air Flow Direction Horizontally There are two sets of air flow blades. Just as the outer air flow blade can be adjusted vertically, the inner blade can be adjusted horizontally. 1 Press the Result: button. x The inner blade moves right and left. 2 To stop the blade moving right and left, press the button again. E-17 Setting the On Timer The On timer enables you to switch on the air conditioner automatically after a given period of time. You can set the period of time from 30 minutes to 24 hours. 1 Make sure that the air conditioner is turned off. The On timer can be set only when the air conditioner is turned off. 2 Press the button one or more times until the required time is displayed. [. . . ] When the power returns, you must press the (ON/OFF) button to restart it. Temperature and Humidity Ranges The following table indicates the temperature and humidity ranges, within which the air conditioner can be used. The automatic protection feature may be triggered and the air conditioner stopped. A water leakage or some other malfunction may happen if the heat exchanger freezes. Water may condense on and drip from the surface of the indoor unit if it is used for a long periods. Low temperature High humidity levels Mode Cooling Drying Outdoor Temperature 21°C to 43°C approx. [. . . ]