User manual LG GRF459BSGA

[. . . ] FRIDGE-FREEZER User's Guide Please read this User's Guide carefully before operating and keep it handy for reference at all times. LG Twin Tower, 20, Yoido-Dong, Youngdungpo-Gu, Seoul, 150-721, Korea. MFL38381501 Printed in Korea Electrical Connections (In the UK Only) Important The wires in this mains lead are coloured in accordance with the following code: GREEN AND YELLOW:EARTH BLUE:NEUTRAL BROWN:LIVE This appliance must be earthed Green and Yellow(Earth) Brown(Live) Blue(Neutral) Fuse Cord grip As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol(b) or coloured Green or Green and Yellow. The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black. The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red. [. . . ] If a leak is detected, avoid any naked flames or potential sources of ignition and air the room in which the appliance is standing for several minutes. Select a good location. Place your fridge-freezer where it is easy to use. 2. Avoid placing the unit near heat sources, direct sunlight or moisture. 3. To ensure proper air circulation around the fridge freezer, please maintain sufficient space on both the sides as well as top and maintain at least 2 inches (5 cm) from the rear wall. 4. To avoid vibration, the unit must be leveled. If required, adjust the leveling screws to compensate for the uneven floor. The front should be slightly higher than the rear to aid in door closing. Leveling screws can be turned easily by tipping the cabinet slightly. Turn the leveling screws counterclockwise( ) to raise the unit, clockwise( ) to lower it. 5. Clean your fridge-freezer thoroughly and wipe off all dust accumulated during shipping. 6. Install accessories such as ice cube box, etc. , in their proper places. They are packed together to prevent possible damage during shipment. 7. Connect the power supply cord (or plug) to the outlet. Don't double up with other appliances on the same outlet. Starting When your fridge-freezer is installed, allow it 2-3 hours to stabilize at normal operating temperature prior to filling it with fresh or frozen foods. If power plug is disconnected, allow 5 minutes delay before restarting. Your fridge-freezer is now ready for use. 17 Operation Temperature Control • Your Refrigerator-freezer has controls that let you regulate the temperature in the Refrigerator and freezer compartments. These controls are on the top of the Refrigerator-freezer. • The initial Temperature of the Freezer and Refrigerator Compartment is -20°C and 3°C respectively. You can now adjust the temperature of the compartments as you want. Refrigerator Freezer 18 Operation Vacation • This function makes the fridge-freezer work in a power saving mode which is useful when you are away on holiday, by reducing energy consumption as much as possible. Pressing ‘VACATION’ starts operation with lamp ON and pressing it again stops the operation. • This function is used when you want to freeze the foods quickly. (Express Freezer) button once, and then the quick freeze operation starts with the lamp it. When its operation ends, it automatically returns to the normal state. If you want to stop the quick freeze operation, press the EXPRESS FRZ. [. . . ] • House fuse has blown or circuit breaker has tripped. Check and/or replace fuse and reset circuit breaker. • Temperature control not set on proper position. • Appliance is placed close to heat source. [. . . ]