User manual LG GSL545WBQV

[. . . ] “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. ENGLISH ENG HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx. com for more information and software tools to convert your files into DivX video. [. . . ] Use the latest High Speed HDMI™ Cable yy with CEC (Customer Electronics Control) function. High Speed HDMI™ Cables are tested to yy carry an HD signal up to 1080p and higher. Supported DTV Audio: MPEG, Dolby Digital, yy Dolby Digital Plus, HE-AAC Supported HDMI Audio format : Dolby yy Digital, PCM (Up to 192 KHz, 32k/44. 1k/48k /88k/96k/176k/192k, DTS Not supported. ) NOTE Depending on the graphics card, DOS mode yy may not work if a HDMI to DVI Cable is in use. MAKING CONNECTIONS 17 RGB-PC connection Transmits the video signal from PC to the TV. To transmit an audio signal, connect an audio cable. Component connection Transmits the analogue video and audio signals from an external device to the TV. Connect the external device and the TV with the component cable as shown. COMPONENT IN ENGLISH ENG 2 VIDEO WHITE L L/MONO AUDIO R USB IN RGB IN (PC) GREEN (*Not Provided) (*Not Provided) WHITE L L RED AUDIO IN (RGB/DVI /COMPONENT) IN 3 (RGB/DVI /COMPONENT) AUDIO IN PC RGB OUT (PC) R 2 VIDEO L/MONO AUDIO R R R GREEN BLUE RED AUDIO OUT GREEN BLUE RED RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Note: RS-232C connection cables are not supplied with the product. RS-232C IN (CONTROL & SERVICE) (*Not Provided) WHITE BLUE RED L R (*Not Provided) GREEN RED AUDIO VIDEO Blu-Ray / HD Cable Box / DVD NOTE (*Not Provided) If yy cables are installed incorrectly, it could cause the image to display in black and white or with distorted colour. 18 MAKING CONNECTIONS Composite connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with th e composite cable as shown. Speaker output SETUP Connect the external speaker to the SPEAKER OUTPUT(STEREO)RGB IN (PC)on the TV. jack 2 DC IN VIDEO VIDEO (CONTROL & SERVICE) VIDEO L (MONO) AUDIO R USB device VCR / DVD / Blu-Ray / HD Cable Box (*Not Provided) USB IN ENG ENGLISH RS-232C IN L/MONO AUDIO R L/MONO AUDIO R O O L L EXTERNAL SPEAKER OUT ANTENNA IN R R AUDIO IN 1 2 2 VIDEO L/MONO AUDIO R (RGB/DVI /COMPONENT) LL+ YELLOW WHITE L R+ R- RED AUDIO IN (*Not Provided) R USB connection Connect a USB storage device such as s USB flash memory, external hard drive or a USB memory card reader to the TV and access the My media menu to use various multimedia files. YELLOW WHITE RED MAKING CONNECTIONS 19 CI module connection Euro Scart connection Transmits the video and audio signals from an external device to the TV set. Connect the external device and the TV set with the euro scart cable as shown. To display images by using progressive scan, make sure to use the euro scart cable. ENGLISH ENG ▼PCMCIA CARD SLOT▼ (*Not Provided) View the encrypted (pay) services in digital TV mode. Do yy not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction. Power cord Remove the accumulated dust or dirt on the power cord regularly. TROUBLESHOOTING Problem Cannot control the TV with the remote control. No image display and no sound is produced. Solution Check the remote control sensor on the product and try again. yy Check if there is any obstacle between the product and the remote control. Check if the batteries are still working and properly installed ( yy Check if the product is turned on. yy Check if the power cord is connected to a wall outlet. yy Check if there is a problem in the wall outlet by connecting other products. yy Check if the Auto sleep feature is activated in the Time settings. yy y Turn the TV off/on using the remote control. yy When connecting to the PC (RGB/HDMI DVI), ‘No signal’ or ‘Invalid Format’ is displayed. 22 SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. [. . . ] Transmission [k][l][ ][Set ID][ ][Data][Cr] Data 00 : OSD off 01 : OSD on Transmission [k][t][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 * Refer to ‘Real data mapping’. Ack [t][ ][Set ID][ ][OK/NG][Data][x] 15. Balance (Command: k t) ►► To adjust balance. You can also adjust balance in the AUDIO menu. Ack [l][ ][Set ID][ ][OK/NG][Data][x] 12. [. . . ]