User manual LG H36E35DT

[. . . ] In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs. Aerial Connect the aerial cable to the socket on the back cover. For the best reception an outdoor aerial should be used. Location Warning To prevent fire or shock hazard, do not expose the set to rain or moisture. Do not place anything containing liquid on top of the set, this may cause a fire or could give an electric shock. Position your set so that no bright light or sunlight falls directly onto the screen. [. . . ] Select a TV system with the D / E button on the System pull-down menu; BG :(Asia/NewZealand/ M. East/Africa/Australia) I :(Hong Kong/South Africa) DK :(East Europe/China/Africa/CIS) L M or ()O}{OOKOMENU 4. Select a TV system with the D / E button on the System pull-down menu; BG :(Asia/NewZealand/ M. East/Africa/Australia) I :(Hong Kong/South Africa) DK :(East Europe/China/Africa/CIS) L :(SECAM L/L' (France) (option) M : (USA/Korea/Philippines) (option) 5. Press the D / E button to select Storage from. :(SECAM L/L' (France) (option) : (USA/Korea/Philippines) (option) 7. Select the beginning programme number with the F / G button or NUMBER buttons on the Storage from pulldown menu. Any number under 10 is entered with a numeric `0' (or `00') in front of it, i. e. Press the D / E button to select Normal or Turbo search. Start. Option: In some models, you can only select Note : a. Turbo search is faster than Normal search and in some models, these searches will automatically store all receivable stations. If the programmed station has poor quality and sound, select the system again in the Manual programme menu. Press the G button to begin auto programming. To stop auto programming, press the MENU 9. This function enables you to delete or skip the stored programmes. You can also move some stations to other programme numbers or insert a blank station data into the selected programme number. Press the MENU button to select the Station menu. Press the G button and then D / E button to select Programme edit. Press the G button to display the Programme edit menu. Select a programme to be deleted with the D / E or F / G button. The selected programme is deleted, and all the following programmes are shifted up one position. Programme edit OOOOCO01 0OOARO1DOOO5OOSO69 O1OOCO03OOO6OOSO17 O2OOCO12OOO7OOSO22 O3OOSO66OOO8OOCO09 O4OOSO67OOO9OOCO11 DeleteOOOOCopy MoveOOOOOOSkip ()}{OOKOMENU Copying a programme 1. Select a programme to be copied with the D / E or F / G button. All the following programmes are shifted down one position. Select a programme to be moved with the D / E or F / G button. Move the programme to the desired programme number with the D / E or F / G button. [. . . ] If during selection you press a wrong number, you must complete the three digit number and then re-enter the correct page number. The D / E button can be used to select the preceding or following page. Programming a colour button in LIST mode (option) Press the M FASTEXT The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button. Press the i button to select the index page. [. . . ]