User manual LG HBM-550 CARACTERISTIQUES TECHNIQUES

[. . . ] Auto Reconnect How to use When the HBM-550 turns off accidentally or intentionally during connected condition, the headset and handset will disconnect. The Headset and handset will automatically reconnect without pairing when the HBM-550 turns on. [ Out of range ] - When the HBM - 550 and your handset are separated by a distance of 33 feet (10meters) or more, the headset and handset will disconnect. When the handset and HBM - 550 are brought back within the required distance, the HBM-550 will automatically reconnect with the handset. [. . . ] Ending a call - Briefly press the PWR/END button. Transferring a call* - While on a call on your handset, briefly press the PWR/END button on the HBM-550 to transfer the audio to the headset. - And to transfer a call from the Headset to Handset, press and hold VOLUME UP button for 5 seconds. Call waiting* - Answer a second call without hanging up the first call by pressing the PWR/END button for 1seconds. Press the PWR/END button for 1seconds to return to the original call. - Briefly press the PWR/END button to terminate the active call. Call reject* Activate call reject by pressing the PWR/END button for 1 second when receiving a call. * It is possible to use these functions only when your Handset supports them. For further information about using these features please consult your Handset's user manual. 8 Summary of button functions Function Power on Power off Volume up Volume down Transferring a call HBM-550 Status Action Press the PWR/END button for at least 2 seconds Press the PWR/END button for at least 5 seconds Briefly press the Volume Up button Briefly press the Volume Down button - Handset to Headset Briefly press the PWR/END button - Headset to Handset Press and hold the VOLUME UP button for 5 seconds Briefly press the PWR/END button Briefly press the PWR/END button Press the PWR/END button for 1 second Press the PWR/END button for 1 second Briefly press the PWR/END button Press the PWR/END button for 1 second Press the PWR/END button for 5 seconds Power off Power on Talking Talking Talking Answering a call Ending a call Call waiting Last number redialing Voice dialing (Handset must support) Call reject Pairing mode Ringing Talking Talking Idle Idle Ringing Power off LED indication Function Operating HBM - 550 Status Power on Power off Pairing mode LED Status Charging The blue LED light flickers fast 5 times. The blue LED light flickers fast 5 times. The red and blue LED light flicker in turn continuously. Headset / Handsfree The blue LED light flickers twice every Profile Connected 5 seconds. Call connected The blue LED light flickers twice every 5 seconds. Unintentional Link Loss The purple (blue and red) LED light (until the lost link is recovered) flickers once every 5 seconds. Charging complete The red LED is turned off. 9 Troubleshooting Precautions Does not turn on Check whether the battery of the HBM - 550 is fully discharged. Unable to communicate Check whether the Handset with the HBM - 550 supports the Headset or Handsfree Bluetooth® Profiles. Check whether the battery of the HBM - 550 is low Unable to pair the Check and make sure the HBM-550 with the Headset is on. Bluetooth® device Check and make sure the Headset is placed in pairing mode. Low sound (speaker) Charge the battery. Determine whether your Handset supports the Headset, or Handsfree profiles. Charge the battery. Do not drop the unit from high places. + _ Press the PWR/END button for at least 2 seconds to turn on the Headset. With the power off, press and hold the PWR/END button for at least 5 seconds to place the Headset in pairing mode. lncrease the volume level. Do not modify, repair, or take apart. + _ Do not expose directly to water, alcohol, benzene, etc. [. . . ] A new battery or one that has not been used for a long period of time could have reduced capacity the first few times it is used. Do not expose the battery to extreme temperatures, never above +60 (+140 or under -20 F). F) (-4 For maximum battery capacity, use the battery in room temperature. If the battery is used in low temperatures, the battery capacity will be reduced. [. . . ]