User manual LG HECTO

[. . . ] OWNER'S MANUAL Laser Display HECTO Please read the safety information carefully before using the product. www. lg. com 2 LICENSE LICENSE Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. [. . . ] (If you don't want to use this function, set to Off. ) Enable Wi-Fi Direct on the device that you want to connect to. The list of devices that can connect to the Laser Display is displayed. Select Yes when the connection request message appears. If the device that you want to connect to accepts the request, WiFi Screen Share will be connected. * For more information on how to use the Intel WiDi, visit http://intel. com/ go/widi. SmartShare™ 39 SmartShare™ Before Using Connecting a USB Device Connect a USB device (external HDD, USB memory) to the USB port of Laser Display to enjoy the content files stored in the USB device with your Laser Display. You cannot write or delete data in the USB device. Connect a USB memory stick as shown below. Removing a USB Device 1 2 3 Press Q. MENU to access the quick menus. Use the or button to move to USB Device and press the OK button. Remove the USB device. NOTE • After the USB device is disconnected, it cannot be read. Remove the USB device and connect it again. USB Memory Stick 40 SmartShare™ Tips for Using a USB Device • A USB device which has a built-in automatic recognition program or uses its own driver might not be recognizable. • Some USB devices may not be supported or will not work properly. • Please use only a USB device formatted as a FAT32 or NTFS file system provided by Windows. • It is recommended to use an external USB hard disk with rated voltage of 5V or less and rated current of 500mA or less. • It is recommended to use a USB hub or hard disk drive with power supplied. (If the power supplied is not enough, the USB device may not be detected properly. ) • It is recommended to use a USB memory stick which is 32 GB or less and a USB hard drive which is 2 TB or less. • If a USB external hard drive with the power saving function does not work, turn the hard drive off and on again to make it work properly. See the owner's manual of the USB hard drive for more information. • The data of a USB device may be damaged, so it is recommended to back up any important files. Users are responsible for data management. The manufacturer bears no responsibility. Supported Files for SmartShare™ • Maximum data transmission rate: 20 Mbps (Megabit per second) • Supported external subtitle formats: *. smi, *. srt, *. sub (MicroDVD, SubViewer 1. 0/2. 0), *. ass, *. ssa, *. txt (TMPlayer), *. psb (PowerDivX) • Supported internal subtitle formats: XSUB (subtitles from DivX6 are supported) Subtitle Language Subtitle Language Language Latin1 English, Spanish, French, German, Italian, Swedish, Finnish, Dutch, Portuguese, Danish, Romanian, Norwegian, Albanian, Gaelic, Welsh, Irish, Catalan, Valencian Latin2 Bosnian, Polish, Croatian, Czech, Slovak, Slovenian, Serbian, Hungarian Latin4 Estonian, Latvian, Lithuanian Cyrillic Bulgarian, Macedonian, Russian, Ukranian, Kazakh Greek Greek Turkish Turkish Hebrew Modern Hebrew Chinese Simplified Chinese Korean Korean Arabic Arabic SmartShare™ 41 Connecting DLNA Digital Living Network Alliance (DLNA) allows you to enjoy videos, music and photos saved on your PC or server using the Laser Display through a home network. Connecting the DLNA-Certified Mobile Device Laser Display and smartphone should be connected to the same network. Connecting DLNA DMR (Digital Media Renderer) With the Windows 7 or Window 8 PC operating system or DLNA-certified device (e. g. mobile phone), music/ videos/photos may be played on the Laser Display without installing a separate program. 1 2 1 2 3 4 5 6 7 Enable Wi-Fi on the smartphone. Install/run the app to share content on the smartphone. [. . . ] Transmission [m][c][][Set ID][][Data][Cr] Data Key Code See Page 84 (* Transmitted in hexadecimal code) 18. Mute (Command: ke) ⇒ Enables/disables the mute function. Transmission [k][e][][Set ID][][Data][Cr] Data 00: Mute On (volume off) 01: Mute Off (volume on) Ack [c][] [Set ID][][OK][Data][x] Data Key Code Ack [e][] [Set ID][][OK][Data][x] Data 00: Mute On (volume off) 01: Mute Off (volume on) 17. Picture Mode (Command: ns) ⇒ Sets the picture mode. [. . . ]