User manual LG HMC024KD1

[. . . ] Mount the product onto the speaker by using a screw as shown in the following connect the speaker cable. After installing your speakers, use holders and cable ties to organize the speaker cables. Cable holder Remove the paper. * This feature is not available in all model. Cable tie When the speaker is installed. *Connect the input terminal with a proper color match. * This feature is not available in all model. 2 Using the Remote Control Name of the Remote Control Buttons Power On/Off Button Input Select Button (See next page) ARC button To select the image size of the screen. Auto Button Automatic adjustment function (Operational for the analog signal only) There is not a function which is supported There is not a function which is supported There is not a function which is supported 1 4 CTR. PWR Button Turn on the power of the PC built in the monitor and then turn off. (The CTR. PWR function operates only when the PC Control menu is off. ) Menu Button UP and Down buttons Bring up and down direction adjustment. [. . . ] This function is suitable for analog signal input 0 only. Auto-configure V-Position 0 H-Position Phase To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters. This function is suitable for analog signal input only. This function is suitable for analog signal input only. Position Auto-configure H-Position 0 V-Position 0 24 Troubleshooting No image is displayed Is the product power cord connected? Power is on, power indicator is green but the screen appears extremely dark. Does the 'Out of range' message appear? See if the power cord is properly connected to the outlet. Adjust brightness and contrast again. If the product is in power saving mode, move the mouse or press any key. The signal from the PC (video card) is out of the vertical or horizontal frequency range of the product. Adjust the frequency range by referring to the Specifications in this manual. * Maximum resolution RGB : 1920 X 1080 @60Hz DVI : 1920 X 1080 @60Hz Connect the RGB cable, and then change the input source to 'RGB'. And then, press the MENU button to set the PC Control value of the SPECIAL menu to 'On'. FAN STOP!" If the power is turned off after this message appears, it means that the fan is out of order. In this case, contact your local service center. 27 Specifications The product specifications can change without prior notice for product improvement. LCD Panel 42. 02 inches (106. 73 cm) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel Anti-Glare coating Visible diagonal size: 106. 73 cm 0. 4845 mm x 0. 4845 mm (Pixel Pitch) Rated Voltage Power Consumption AC 100-240V~ 50/60Hz 3. 0A On Mode : 300W Typ. (With PC), 240W Typ. (Only Monitor) Stand-by(Off Mode) : 1W(MNT OFF, PC OFF) (Remote Comtrol DC OFF) Power Dimensions &Weight [1] H W [2] H D W D [3] H [4] H W D W D Width x Height x Depth [1] 96. 7 cm (38. 07 inches) x 55. 98 cm (22. 04 inches) x 12. 37 cm (4. 87 inches) [2] 96. 7 cm (38. 07 inches) x 55. 98 cm (22. 04 inches) x 12. 37 cm (4. 87 inches) [3] 96. 7 cm (38. 07 inches) x 63. 50 cm (25. 00 inches) x 25. 85 cm (10. 18 inches) [4] 96. 7 cm (38. 07 inches) x 63. 50 cm (25. 00 inches) x 25. 85 cm (10. 18 inches) Net [1] 20. 0 kg (44. 09 lbs) [3] 23. 4 kg (51. 59 lbs) [2] 22. 6 kg (49. 82 lbs) [4] 26. 0 kg (57. 32 lbs) NOTE Information in this document is subject to change without notice. 28 Specifications The product specifications can change without prior notice for product improvement. Video Signal Max. Resolution RGB:1920X1080@60Hz VI:1920X1080@60Hz-Itmaynotbesupported D dependingontheOSorvideocardtype. Recommended Resolution RGB:1920X1080@60Hz D VI:1920X1080@60Hz-Itmaynotbesupported dependingontheOSorvideocardtype. Horizontal Frequency RGB:30-83kHz DVI:30-83kHz Vertical Frequency 56-60Hz(RGB/DVI) Synchronization Type Separate/Composite/Digital Input Connector Environmental Conditions 15-pinD-Subtype, DVI(Digital), RS-232C Operational Condition Temperature:0°C~40°C, Humidity:10%~80% Storage Condition Temperature:-20°C~60°C, Humidity:5%~95% * Applicable only for models that support the speakers RMSAudioOutput InputSensitivity SpeakerImpedance 10W+10W(R+L) 0. 7Vrms 8 Audio NOTE Informationinthisdocumentissubjecttochangewithoutnotice. 29 Specifications PC Mode Preset Mode Preset mode 1 2 3 4 5 640 x 480 800 x 600 1024 x 768 1280 x 1024 1920 x 1080 Horizontal Frequency (kHz) 31. 469 37. 879 48. 363 63. 981 67. 5 Vertical Frequency (Hz) 59. 94 60. 317 60 60. 02 60 Power Indicator Mode On Mode Sleep Mode Off Mode Product Blue Amber - 30 Specifications VESA wall mounting Connected to another object (stand type and wall-mounted type. ) This product accepts a VESA-compliant mounting interface pad. - (This has to be purchased separately if required. ) For further information, refer to the VESA Wall Mounting Instruction Guide. Kensington Security Slot- (This has to be purchased separately if required. ) Connected to a locking cable that can be purchased separately at most computer stores 31 Specifications Connecting the USB(Universal Serial Bus) Cable "USB (Universal Serial Bus)" is an innovation in connecting your different desktop peripherals conveniently to your computer. By using the USB, you will be able to connect your mouse, keyboard, and other peripherals to your display instead of having to connect them to your computer. This will give you greater flexibility in setting up your system. USB allows you to connect a chain of up to 120 devices on a single USB port; and you can "hot" plug (attach them while the computer is running) or unplug them while maintaining the Plug and the Plug auto detection and configuration. This display has an integrated BUS-powered USB hub, allowing up to 2 other USB devices to be attached it. 1. 2. E IN RS-232C (CONTROL& SERVICE) OUT IN DVI IN RGB IN AUDIO (RGB/DVI) LAN RGB OUT Connect the upstream port of the display to the downstream port of the USB compliant PC or another hub using the USB cable. Connect the USB compliant peripherals to the downstream ports of the display. RGB OUT H/PHONE OUT SP/DIF USB SERLAL PORT USB downstream Port(3) connect the cables from USB compliant peripherals-such as keyboard, mouse, etc 3. The monitor's USB terminal supports USB 2. 0 and High Speed cables. High Speed Data Rate Power Consumption 480Mbps 2. 5W (Max, each Port) Full Speed 12Mbps 2. 5W (Max, each Port) Low Speed 1. 5Mbps 2. 5W (Max, each Port) NOTE To activate the USB hub function, the display must be connected to a USB compliant PC(OS) or another hub with the USB cable(enclosed). When connecting the USB cable, check that the shape of the connector at the cable side matches the shape at the connecting side. [. . . ] Transmission [d][h][][Set ID][][Data][x] * The data range is from 00 to 64(in Hex). Acknowledgement [h][][Set ID][][OK/NG][Data][x] RS-12 RS-232C Controlling the Multiple Product Protocollo trasmissione / ricezione 22. Tile ID Set (Command : d i) To assign the Tile ID for Tiling function. Transmission [d][i][][Set ID][][Data][x] * The data range is from 00 to 10 tile mode. [. . . ]