User manual LG HR835T

[. . . ] ENGLISH SIMPLE MANUAL Blu-ray Disc™/DVD Player with built-in HDD & HD Tuner Please read this manual carefully before operating your set and retain it for future reference. To view the instructions of advanced features, visit http://www. lg. com and then download Owner’s Manual. HR835T / HR832T 1 Getting Started 2 Getting Started Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. [. . . ] You can change the resolution using [Setup] menu. 2. Use a/d to select the [Setup] and press ENTER (b). The [Setup] menu appears. 1 Getting Started 3. Use w/s to select [DISPLAY] option then press d to move to the second level. 4. Use a/d to select the [Resolution] option then press ENTER (b) to move to the third level. 5. Use w/s to select the desired resolution then press ENTER (b) to confirm your selection. yy If your TV does not accept the resolution you have set on the player, you can set resolution to 576p as follows: 1. Press B to open the disc tray. 2. Press Z (STOP) for more than 5 seconds. Note , , 2 System Setting 12 System Setting Wired network connection Connect the unit’s LAN port to the corresponding port on your Modem or Router using a commercially available LAN or Ethernet cable (CAT5 or better with RJ45 connector). In the example configuration for wired connection below, this player would be able to access content from either of the PCs. Wired Network Setup If there is a DHCP server on the local area network (LAN) via wired connection, this player will automatically be allocated an IP address. After making the physical connection, a small number of home networks may require the player’s network setting to be adjusted. Adjust the [NETWORK] setting as follow. 2 System Setting Router Preparation Before setting the wired network, you need to connect the broadband internet to your home network. Broadband Service 1. Select [Connection Setting] option in the [Setup] menu then press ENTER (b). WAN LAN 1 PC LAN 2 LAN 3 PC LAN Cable 2. Use w/s/a/d to select the IP mode between [Dynamic] and [Static]. Normally, select [Dynamic] to allocate an IP address automatically. Rear of this unit If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using w/s/ a/d and numerical buttons. If you make a mistake while entering a number, press CLEAR to clear the highlighted part. Note , , System Setting 3. Select [OK] and press ENTER (b) to apply network settings. 4. The player will ask you to test the network connection. Select [OK] and press ENTER (b) to complete the network connection. 5. If you select [Test] and press ENTER (b) at step 5 above, the network connection status is displayed on the screen. You can also test it on the [Connection Status] in the [Setup] menu. 13 Settings Adjust the Setup Settings You can change the settings of the player in the [Setup] menu. 1. Press HOME (n). 2 System Setting 2. Use a/d to select [Setup] and press ENTER (b). The [Setup] menu appears. 3. Use w/s to select the first setup option, and press d to move to the second level. 4. Use w/s to select a second setup option, and press ENTER (b) ) or d to move to the third level. 5. Use w/s to select a desired setting, and press ENTER (b) ) or d to confirm your selection. 14 Operating General Playback Using [HOME] menu To access numerous functions of the unit, press HOME on the remote. HOME: Accesses or removes the Home Menu. a/d: Used to navigate on-screen displays. BACK (1): Exits the menu. Playing a Disc ert 1. Press B (OPEN/CLOSE), and place a disc on the disc tray. 2. Press B (OPEN/CLOSE) to close the disc tray. For the most Audio CD, BD-ROM and DVD-ROM discs, playback starts automatically. 4. Select [Movie] or [Music] using a/d, and press ENTER (b). [. . . ] Connect the USB storage with at least 1GB free space. yy Ensure that the unit is correctly connected to the local area network and can access the internet. yy Your broadband speed may not be fast enough to use the BD-Live features. Contact your Internet Service Provider (ISP) and increase the broadband speed to suit the unit’s requirements. [. . . ]