User manual LG HR-925C

[. . . ] ENGLISH OWNER’S MANUAL Blu-ray Disc™/DVD Player with built-in HDD & HD Tuner Please read this manual carefully before operating your set and retain it for future reference. HR922C/HR923C/HR925C/HR929C www. lg. com Getting Started 3 Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. [. . . ] yy When you record pay channel, recorded title can be divided in to several titles according to CAM authentication. yy Some of title can not be played well if title is recorded when CAM is not authenticated by this recorder. yy If you want to record the USB HDD, Connect an USB HDD to the USB Port on the rear panel and then select the [USB HDD] on [Default Recording Device] in the setup menu. yy You can not record two scrambled programme at the same time. Note , , 1. Press TEXT while watching TV. 4 Operating 2. Use coloured (R/G/Y/B) button to select a page. You can also select a page by entering a three digit number with the numerical buttons. 3. Press TEXT or EXIT to exit the teletext screen. Additionally, you now have four coloured buttons to navigate through the content of the page. The use of these coloured buttons will be displayed on the screen. Note , , Operating 45 Timer Recording (Manual) You can set the timer for a total of 32 programmes, up to 22-28 days in advance. 1. While watching TV, press TIMER REC. 5. Select [OK] then press ENTER (b). If you input the wrong information, an error message will appear and the timer recording cannot be made. 2. Use W/S/A/D to select the date to record, and press ENTER (b). 3. Select an item using A/D and adjust it using W/S. You can use numbered buttons to change the setting. Start time End time Channel Sets the start time. (If you want to display more channels, press CH LIST) Choose a desired repeat mode. (Once, Daily, Weekly or Mon-Fri) 4 Operating Repeat yy The timer recording can be set from 3 minutes after the current time. yy You should unlock parental rating of CI or CAM if you want to use timer record correctly. 4. Press ENTER (b). Note , , 46 Operating Timer Recording (EPG) You can also set the timer based on the information provided by the EPG. 1. While watching TV, press GUIDE. Canceling a timer recording You can cancel a timer recording before the timer recording actually starts. 3. Use A/DW/S to select a schedule you want to cancel. 4. Use W/S to select [Timer Record List], and press the green (G) coloured button. 2. Use A/D to select date field, and select the date of recording schedule using W/S. 3. Use A/D to select programme field, and set the programme using W/S. 4. Use A/D to select the programme list, and select a programme you want to record using W/S. For the successfully scheduled programme, a red bullet mark appears. A red bullet mark may not appear for inavailable programme to record. [. . . ] yy There are some capacities in HDD reserved for the file system and timeshift. 6 Appendix 90 Appendix Video Output Resolution When the non-copy protected media is playing back Video Out Resolution 576i 576p 720p 1080i 1080p/24 Hz 1080p / 50 Hz HDMI OUT 576p 576p 720p 1080i 1080p / 24 Hz 1080p / 50 Hz 576i 576i COMPONENT VIDEO OUT HDMI connected 576i 576p 720p 1080i 1080i 1080i HDMI disconnected When the copy protected media is playing back Video Out Resolution 576i 576p 720p 1080i 1080p/24 Hz 1080p / 50 Hz HDMI OUT 576p 576p 720p 1080i 1080p / 24 Hz 1080p / 50 Hz 576i 576i 576i 576i COMPONENT VIDEO OUT HDMI connected 576i 576p 576p 576p 576p 576p HDMI disconnected 6 Appendix yy This unit supports simultaneous output of all video out jacks. HDMI OUT connection yy For the 576i resolution setting, real output resolution of HDMI OUT will change to 576p. yy If you select a resolution manually and then connect the HDMI jack to TV and your TV does not accept it, the resolution setting is set to [Auto]. yy If you select a resolution that your TV does not accept, the warning message will appear. After resolution change, if you cannot see the screen, please wait 20 seconds and the resolution will automatically revert back to the previous resolution. yy The 1080p video output frame rate may be automatically set to either 24Hz or 50Hz depending both on the capability and preference of the connected TV and based on the native video frame rate of the content on the BD-ROM disc. COMPONENT VIDEO OUT Connection Blu-ray Disc, DVD could prevent up-scaling on analogue output. VIDEO OUT connection The resolution of the VIDEO OUT jack is always outputted at 576i resolution. Appendix 91 Specifications General Power requirements Power consumption Dimensions (W x H x D) Net Weight (Approx. ) Operating temperature Operating humidity Television system: TV Recording Recording format Recordable media Connectors VIDEO OUT: COMPONENT VIDEO OUT HDMI OUT (video/audio) ANALOGUE AUDIO OUT DIGITAL OUT (OPTICAL) ANTENNA IN USB Port System Laser wavelength Signal system Frequency response Signal-to-noise ratio Harmonic distortion Dynamic range LAN port Wireless LAN (internal antenna) Bus Power Supply (USB) Semiconductor laser 405 nm / 650 nm Standard PAL/NTSC colour TV system 20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling) More than 100 dB (Analogue OUT connectors only) Less than 0. 008% More than 95 dB Ethernet jack x 1, 10BASE-T/100BASE-TX Integrated IEEE 802. 11n (Draft 2. 0) wireless networking access, compatible with 802. 11b/g Wi-Fi networks. [. . . ]