User manual LG HR929S

[. . . ] ENGLISH Blu-ray DiscTM/DVD Player with built-in HDD & HD Tuner Please read this manual carefully before operating your set and retain it for future reference. HR925S/HR929S OWNER'S MANUAL www. lg. com Getting Started 3 Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. [. . . ] For the successfully scheduled programme, a red bullet mark appears. A red bullet mark may not appear for inavailable programme to record. Press BACK (1) to return to the TV viewing. Press TIMER REC, and check whether the schedule is registered properly or not. Select [No] and press ENTER (b) to cancel. Select [Yes] and press ENTER (b) to delete selected schedules (selected recording). 4 Operating Editing a timer recording You can edit a pre-scheduled timer recording before the timer recording actually starts. Press ENTER (b) to display the [Record setting] menu. 4. Follow the steps 3-5 from "Timer Recording (Manual)" on page 45 to complete the editing. Operating 47 Instant Timer Recording You can set the recording time instantly to stop the recording automatically. Use CH (W/S) to select a programme you want to record. While recording, press A/D repeatedly to set the recording duration 4. Press ENTER (b). General Playback Playing Discs 1. For most Audio CD, BD-ROM and DVD-ROM discs, playback starts automatically. y The standard recording time is 3hours (MAX=6hours). Depending on the remaining capacity of HDD, the recording time is somewhat flexible . y If the unit cannot catch the signal, the recording will be pause, actual recording time can be less than the time set on timer. y You cannot record radio or blocked channels. y The quality of recording can be different on the status of the broadcast signal. y During the recording, turning off by force can cause a serious problem on hard disk drive. y Recording can be restarted when contents status is changed and it'll separte recording title into two individual title consequently. While navigating [Movie], [Photo] or [Music] menu, press green (G) colored button to change the device. Select a file using W/S/A/D, and press d (PLAY) or ENTER (b) to play the file. y Playback functions described in this manual are not always available in every files and media. [. . . ] y There are some capacities in HDD reserved for the file system and timeshift. 6 Appendix 90 Appendix Video Output Resolution When the non-copy protected media is playing back Video Out Resolution 576i 576p 720p 1080i 1080p/24 Hz 1080p / 50 Hz HDMI OUT 576p 576p 720p 1080i 1080p / 24 Hz 1080p / 50 Hz 576i 576i COMPONENT VIDEO OUT HDMI connected 576i 576p 720p 1080i 1080i 1080i HDMI disconnected When the copy protected media is playing back Video Out Resolution 576i 576p 720p 1080i 1080p/24 Hz 1080p / 50 Hz HDMI OUT 576p 576p 720p 1080i 1080p / 24 Hz 1080p / 50 Hz 576i 576i 576i 576i COMPONENT VIDEO OUT HDMI connected 576i 576p 576p 576p 576p 576p HDMI disconnected 6 Appendix y This unit supports simultaneous output of all video out jacks. HDMI OUT connection y For the 576i resolution setting, real output resolution of HDMI OUT will change to 576p. y If you select a resolution manually and then connect the HDMI jack to TV and your TV does not accept it, the resolution setting is set to [Auto]. y If you select a resolution that your TV does not accept, the warning message will appear. After resolution change, if you cannot see the screen, please wait 20 seconds and the resolution will automatically revert back to the previous resolution. y The 1080p video output frame rate may be automatically set to either 24Hz or 50Hz depending both on the capability and preference of the connected TV and based on the native video frame rate of the content on the BD-ROM disc. COMPONENT VIDEO OUT Connection Blu-ray Disc, DVD could prevent up-scaling on analogue output. VIDEO OUT connection The resolution of the VIDEO OUT jack is always outputted at 576i resolution. Appendix 91 Specifications General Power requirements Power consumption Dimensions (W x H x D) Net Weight (Approx. ) Operating temperature Operating humidity Television system: TV Recording Recording format Recordable media Audio recording format Connectors VIDEO OUT: COMPONENT VIDEO OUT HDMI OUT (video/audio) ANALOGUE AUDIO OUT DIGITAL OUT (OPTICAL) ANTENNA IN USB Port System Laser wavelength Signal system Frequency response Signal-to-noise ratio Harmonic distortion Dynamic range LAN port Wireless LAN (internal antenna) Bus Power Supply (USB) Semiconductor laser 405 nm / 650 nm Standard PAL/NTSC colour TV system 20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling) More than 100 dB (Analogue OUT connectors only) Less than 0. 008% More than 95 dB Ethernet jack x 1, 10BASE-T/100BASE-TX Integrated IEEE 802. 11n (Draft 2. 0) wireless networking access, compatible with 802. 11b/g Wi-Fi networks. [. . . ]