User manual LG HR932D

[. . . ] ENGLISH OWNER’S MANUAL Blu-ray Disc™/DVD Player with built-in HDD & HD Tuner Please read this manual carefully before operating your set and retain it for future reference. HR931D / HR932D / HR933D / HR935D / HR939D www. lg. com Getting Started 3 Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. [. . . ] 2. Press the red (R) coloured (R) button. 3. Use A/DW/S to select a schedule you want to cancel. 4. Use W/S to select [Timer Record List], and press the green (G) coloured button. 2. Use A/D to select date field, and select the date of recording schedule using W/S. 3. Use A/D to select programme field, and set the programme using W/S. 4. Use A/D to select the programme list, and select a programme you want to record using W/S. For the successfully scheduled programme, a red bullet mark appears. A red bullet mark may not appear for inavailable programme to record. Select [No] and press ENTER (b) to cancel. Select [Yes] and press ENTER (b) to delete selected schedules (selected recording). 4 Operating Editing a timer recording You can edit a pre-scheduled timer recording before the timer recording actually starts. 3. Press ENTER (b) to display the [Record setting] menu. 6. Press BACK (1) to return to the TV viewing. 7. Press TIMER REC, and check whether the schedule is registered properly or not. 4. Follow the steps 3-5 from “Timer Recording (Manual)” on page 43 to complete the editing. Operating 45 Instant Timer Recording You can set the recording time instantly to stop the recording automatically. 1. Use CH (W/S) to select a programme you want to record. 3. While recording, press A/D repeatedly to set the recording duration on recording OSD to confirm modification. 4. Press ENTER (b). General Playback Playing Discs 1. Press B (OPEN/CLOSE), and place a disc on the disc tray. 2. Press B (OPEN/CLOSE) to close the disc tray. For most Audio CD, BD-ROM and DVD-ROM discs, playback starts automatically. 3. Press HOME (n). 5. Press Z to stop recording. yy The default recording time is 3hours (MAX=6hours). Depending on the remaining capacity of HDD, the recording time is somewhat flexible . I yy f the unit cannot catch the signal, the recording will be pause, actual recording time can be less than the time set on timer. yy You cannot record radio or blocked channels. yy The quality of recording can be different on the status of the broadcast signal. yy During the recording, turning off by force can cause a serious problem on hard disk drive. [. . . ] HDMI OUT 576p 576p 720p 1080i 1080p / 24 Hz 1080p / 50 Hz HDMI OUT connection 6 Appendix yy For the 576i resolution setting, real output resolution of HDMI OUT will change to 576p. yy If you select a resolution manually and then connect the HDMI jack to TV and your TV does not accept it, the resolution setting is set to [Auto]. yy If you select a resolution that your TV does not accept, the warning message will appear. After resolution change, if you cannot see the screen, please wait 20 seconds and the resolution will automatically revert back to the previous resolution. Appendix 89 Specifications General Power requirements Power consumption Dimensions (W x H x D) Net Weight (Approx. ) Operating temperature Operating humidity Television system: TV Recording Recording format Recordable media Audio recording format Connectors HDMI OUT (video/audio) OPTICAL (DIGITAL AUDIO OUT) ANTENNA IN USB Port System Laser wavelength Signal system Frequency response Signal-to-noise ratio Harmonic distortion Dynamic range LAN port Wireless LAN (internal antenna) Bus Power Supply (USB) Semiconductor laser 405 nm / 650 nm Standard PAL/NTSC colour TV system 20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling) More than 100 dB (Analogue OUT connectors only) Less than 0. 008% More than 95 dB Ethernet jack x 1, 10BASE-T/100BASE-TX Integrated IEEE 802. 11n (Draft 2. 0) wireless networking access, compatible with 802. 11b/g Wi-Fi networks. [. . . ]