User manual LG HW300Y

[. . . ] OWNER'S MANUAL DLP PROJECTOR Please read this manual carefully before operating your set and retain it for future reference. HW300Y HW300G HW301Y HW301G www. lg. com 2 SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS Please take note of the safety instructions to prevent any potential accident or misuse of the projector. Read these instructions. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING/CAUTION - TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Indoor Installation WARNING y Do not place the Projector in direct sunlight or near heat sources such as radiators, fires, stove etc. [. . . ] Check your network settings when the DLNA option does not work properly. If there is an abnormal operation or an error occurs in Nero Media Home, the DLNA option may not work properly. In this case, exit Nero Media Home and restart the programme. You can download the latest version of Nero Media Home by clicking the question mark at the bottom-left of the program. When the network is unstable, the device may be slower or may need to load during playback. When playing a video in DLNA mode, the Multi Audio and Closed Caption features are not supported. When selecting Full Screen in DLNA mode, the ratio of the outputted screen may differ from the original. When more than one projector is connected to a single server in DLNA mode, a file may not play properly, depending on the server performance. If the play time information is not provided by the server, it is displayed as "--:--:--. " DLNA operation may not work properly according to the AP manufacturers. ENTERTAINMENT 35 Installing Nero MediaHome 4 Essentials Nero MediaHome 4 Essentials is easy to use DLNA server software for Windows. Computer requirements for Nero MediaHome 4 Essentials y Windows® XP (Service Pack 2 or higher), Windows Vista® (no Service Pack required), Windows® XP Media Center Edition 2005 (Service Pack 2 or higher), Windows Server® 2003 y Windows Vista® 64-bit edition (application runs in 32-bit mode) y Hard drive space: 200 MB hard drive space for a typical installation of Nero MediaHome stand-alone y 1. 2 GHz Intel® Pentium® III or AMD SempronTM 2200+ processors y Memory: 256 MB RAM y Graphics card with at least 32 MB video memory, minimum resolution of 800 x 600 pixels, and 16-bit color settings y Windows® Internet Explorer® 6. 0 or higher y DirectX® 9. 0c revision 30 (August 2006) or higher y Network environment: 100 Mb Ethernet, WLAN (IEEE 802. 11a/b/ g/n) 1 Close all Microsoft Windows programs and exit any anti-virus software that may be running. Essentials CD-ROM into your computer's CD-ROM drive. 2 Insert the Nero MediaHome 4 3 Click Nero MediaHome 4 Essentials. The installation is prepared and the installation wizard appears. Click Next to go to the next step. 4 Click the Next button to display the 5 If you accept all conditions, click I accept the License Conditions check box and click Next. Installation is not possible without this agreement. installation process is started. 6 Click Typical and click Next. The 7 If you want to take part in the anonymous collection of data, select the check box and click the Next button. the installation. 8 Click the Exit button to complete 36 ENTERTAINMENT Sharing Files and Folders After installing Nero MediaHome, you must add folders you wish to share. Playing Shared contents You can display and play movie, photo and music content stored on your computer or other DLNA media servers. 1 Double-click the Nero MediaHome 4 Essentials icon on the desktop. define your network name in the Network name field. The Network name you enter will be recognized by your projector. 2 Click Network icon on the left and 1 3 Click Shares icon on the left. 4 Click Local Folders tab on the Shared screen. Press the USB button. Then, move to MOVIE/PHOTO/MUSIC LIST with the Navigation buttons and press the OK button. Press the Blue buttons to search other network device. [. . . ] A pop-up window will appear on the screen when an update is available. 1 Press MENU to access the menu. 2 Press the Red buttons to access Customer Support. 3 Press the Navigation buttons to scroll to Software Update and press OK. The current firmware version displays. 66 MAINTENANCE NOTE y The software downloading time will vary depending on the software size and network conditions. y During the software update procedure, do not turn off the projector or disconnect AC power, or disconnect the network. [. . . ]