User manual LG HX-806-SH

[. . . ] ENGLISH DEUTSCH ITALIANO ESPAÑOL SIMPLE MANUAL 3D Blu-rayTM Home Theater Please read this manual carefully before operating your set and retain it for future reference. HX806SH (HX806SH, SH86SH-F/ S/ C, SH95TA-W) P/NO: MFL67100761 HB806SH-D0_BDEULL_SIMI_ENG_0761. indd 1 2011-02-02 7:09:02 1 Getting Started 2 Getting Started Safety Information 1 Getting Started CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. [. . . ] - Connect the black stripe of each wire to the terminals marked - (minus) and the other end to the terminals marked + (plus). 2 Connecting Colour Grey Blue Green Speaker Rear Rear Center Sub woofer Front Front Position Rear right Rear left Centre Any front position Front right Front left Orange Red White HB806SH-D0_BDEULL_SIMI_ENG_0761. indd 12 2011-02-02 7:09:04 System Setting 13 Settings Adjust the Setup Settings You can change the settings of the player in the [Setup] menu. Press HOME (n). Resolution Setting The player provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu. Use A/D to select the [Setup] and press ENTER (b). Use W/S to select [DISPLAY] option then press D to move to the second level. Use W/S to select the [Resolution] option then press ENTER (b) to move to the third level. 2. Use A/D to select the [Setup] and press ENTER (b). The [Setup] menu appears. 3 System Setting 5. Use W/S to select the desired resolution then press ENTER (b) to confirm your selection. , Note 3. Use W/S to select the first setup option, and press D to move to the second level. If your TV does not accept the resolution you have set on the player, you can set resolution to 576p as follows: 1. 2 Press Z (STOP) for more than 5 seconds. 4. Use W/S to select a second setup option, and press ENTER (b) to move to the third level. 5. Use W/S to select a desired setting, and press ENTER (b) to confirm your selection. HB806SH-D0_BDEULL_SIMI_ENG_0761. indd 13 2011-02-02 7:09:04 14 System Setting Wired Network Setup If there is a DHCP server on the local area network (LAN) via wired connection, this player will automatically be allocated an IP address. After making the physical connection, a small number of home networks may require the player's network setting to be adjusted. Adjust the [NETWORK] setting as follow. 5. The player will ask you to test the network connection. Select [OK] and press ENTER (b) to complete the network connection. If you select [Test] and press ENTER (b) at step 5 above, the network connection status is displayed on the screen. You can also test it on the [Connection Status] in the [Setup] menu. Preparation Before setting the wired network, you need to connect the broadband internet to your home network. 3 System Setting 1. Select [Connection Setting] option in the [Setup] menu then press ENTER (b). 2. Select [Yes] and press ENTER (b) to continue. [. . . ] The [BD-LIVE connection] option in the [Setup] menu is set to [Prohibited]. Set the option to [Permitted]. Streaming video services (such as YouTubeTM, etc. ) are often stopped or "buffer" during playback. Shared folder or files from media server are not displayed on the device list. There is no sound or the sound is distorted. Your broadband service speed may not be fast enough to stream video services. [. . . ]