User manual LG JMC8130DDQ

[. . . ] WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. [. . . ] The [5. 1 Speaker setup] appears. [Speaker selection] Select a speaker that you want to adjust. NOTE Certain speaker settings are prohibited by the Dolby Digital licensing agreement. [Size] Since the speaker settings are fixed, you cannot change the settings. [Volume] Press I i to adjust the output level of the selected speaker. Front L/R : 0 ~ -5 SubWoofer, Rear L/R, Center : 5 ~ -5 3 Installation 3. Returns to the previous menu by pressing O RETURN. [Distance] After you connected speakers to your unit, set the Distance between the speakers and your listening point if the distance of Center or Rear speakers is bigger than the distance of Front speakers. This allows the sound from each speaker to reach the listener at the same time. Press I i to adjust the Distance of the selected speaker. This distance is equivalent to a difference of the distance between Center or Rear speaker and Front speakers. [Test] Select [Speaker Test Start] by using the U u and press ENTER. Adjust the volume to match the volume of test signals memorized in the system. JMC8130DDQ-DH_BDEULL_ENG_4231. indd 28 2010-02-03 ¿ÀÀü 3:50:00 Installation DRC (Dynamic Range Control) Make the sound clear when the volume is turned down (Dolby Digital only). Set to [On] for this effect. Lock (Parental Control) Initial Setting the Area Code: When you use this unit for the first time, you have to set the Area Code. Select the [Lock] menu and then press i. The password is cleared. NOTE All the downloaded videos from DivX VOD can only be played back on this unit. Area Code Enter the code of the area whose standards were used to rate the DVD video disc, based on the list on page 47. Select [Area Code] on the [Lock] menu then press i. Select the first character using U u buttons. Press ENTER and select the second character using U u buttons. Press ENTER to confirm your Area code selection. JMC8130DDQ-DH_BDEULL_ENG_4231. indd 30 2010-02-03 ¿ÀÀü 3:50:00 Operation 1 4 Operation Using the Home Menu 1. Displays the [Home] menu. Basic Operations 1. Insert the disc by using the Z OPEN/ CLOSE or Connect the USB device to the USB port. [Movie] ­ Start video media's playback or displays the [MOVIE] menu. [Setup] ­ Displays the [Setup] menu. 4. Press ENTER then selected option menu. NOTE You can not select the [Music], [Movie] or [Photo] option when the USB device is not connected or a disc is not inserted. NOTE · For the most Audio CD and DVD-ROM discs, playback starts automatically. · The unit plays only music file contained in the USB storage device or disc automatically. JMC8130DDQ-DH_BDEULL_ENG_4231. indd 31 2010-02-03 ¿ÀÀü 3:50:00 Operation 2. [. . . ] Check the antenna connection and adjust The antenna is positioned or connected its position. The signal strength of the radio station is Tune to the station manually. No stations have been preset or preset Preset some radio stations, see page for stations have been cleared (when tuning details. The remote is not pointed directly at the unit. [. . . ]