User manual LG JVM1490SD

[. . . ] For example, the phone does not allow to be used in hospital because pacemakers and hearing aids can be affected. Minor interference may affect TVs, radios, PCs, etc. Do not hold the phone in your hand while driving. Do not dismantle phone or battery. Keep the phone in a safe place out of children's reach since it contains the detachable small parts and create a choking hazard. Do not touch the charger with wet hands. ENGLISH 4 For your safety, use ONLY specified ORIGINAL batteries and chargers. Please note: Unusable batteries should be disposed of in accordance with relevant legislation. Only use ORIGINAL accessories to avoid damage to your phone. Emergency call may not be available under all cellular networks. Therefore, you should never depend solely on the phone for essential communications such as medical emergencies. Important Information This user's guide contains important information on the use and operation of this phone. [. . . ] Alternatively: If there is no word you want you can add your own word. Press < [Options] in the Predictive edit mode. You can see the following. Input your word 3. To insert a punctuation mark, press 1 repeatedly until the desired mark appears. T9 languages You can select T9 Languages by selecting Menu. In T9 mode, you can also select T9 Off menu. (Default is T9 On) ENGLISH 34 Accessing the Menu Inbox [Menu 1-2] When you receive a text message, your phone shows the symbol and stores it in the incoming message lists. Scroll to the desired message by using U , D. In addition, you can see Delete all for deleting all incoming messages at the bottom of the list. While reading the message, press < [Options] to access the available options. Delete The selected message is deleted. Edit You can edit an incoming message and send or save the edited message. Forward You can forward the selected message to the other party. Get number If the selected message has the phone number, you can extract and save it in a phonebook. Also, you can call by this number. Reply You can reply to the sender by message. Return call You can call back to the sender who sent the message automatically. ENGLISH 35 Messages [Menu 1] Accessing the Menu Outbox [Menu 1-3] When you enter this menu, you can see the message(s). Scroll to the desired message by using U , D and press < to see the message. You can check the following submenus. Home [Menu 1-5-2-1] The number dialed on the home network to listen to voicemail. Roam [Menu 1-5-2-2] The number dialed when other networks to listen to voicemail. Namecard [Menu 1-6] It's for editing the namecard. The items of the namecard are a name, mobile, office, and memo. Edit : You can edit a namecard. Delete : You can delete a namecard. Templates [Menu 1-7] It's for editing pre-defined messages. You can see 11 pre-defined messages in the list. You can save 6 templates before you edit. The others are <Empty>. Edit : You can edit a template. Delete : You can delete the template. ENGLISH 39 Messages [Menu 1] Accessing the Menu Settings [Menu 1-8] Message type [Menu 1-8-1] Text, Voice, Fax, Natl. paging, X400, E-mail, ERMES Usually, the type of message is set to Text. You can convert your text into alternative formats, which are suitable for the device that will be received the message. Contact your service provider for the availability of this function. Validity period [Menu 1-8-2] This network service allows you to set how long your text messages will be stored at the message center while attempts are made to deliver them to you. Status report [Menu 1-8-3] If you set Yes in this menu, you can check whether your message is sent successfully or not. Pay for reply? [. . . ] You can swap between calls by selecting the < [Options] key then Swap. 2-2 Setting up a Multiparty Call You can connect a call on hold to the currently active call to form a multiparty call by selecting the < [Options] key then Multiparty/Join all. 2-3 Putting the Multiparty Call on Hold To put a multiparty call on hold, select the < [Options] key then Multiparty/Hold all. ENGLISH 2-4 Activate the Multiparty Call on Hold To make a multiparty call on hold active, select the < [Options] key then Multiparty/Join all. 73 In call Menu Additional Functions 2-5 Adding Calls to the Multiparty Call To join an active call to the held multiparty call, select the < [Options] key then Multiparty/Join all. 2-6 Displaying Callers in a Multiparty Call To scroll through the numbers of the callers who make up a multiparty call on the handset screen, press U and D keys. 2-7 Putting a Member of a Multiparty Call on Hold To place one selected caller (whose number is currently displayed on-screen) of a multiparty call on hold, select the < [Options] key then Multiparty/Exclude. 2-8 A Private Call in a Multiparty Call To have a private call with one caller of a multiparty call, display the number of the caller you wish to talk to on the screen, then select the < [Options] key and Multiparty/Private to put all the other callers on hold. 2-9 Ending a Multiparty Call The currently displayed caller of a multiparty call can be disconnected by pressing the E [End] key. To end a multiparty call, press the < [Options] key then select Multiparty/End multiparty. Selecting the < [Options] key then Multiparty/End all, will end all the active and held calls. 2-10 Explicit Call Transfer (ECT) If you have one caller on hold and another active call, you may connect one call party to another call party and then leave the call. This is done by selecting the Multiparty/Transfer option from the in-call menu. ENGLISH 74 Accessories There are various accessories for your mobile phone. [. . . ]