User manual LG KCB550B

[. . . ] If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized repair service provider for a replacement. The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily accessible after installation. Operate the display only from a power source indicated in the specifications of this manual or listed on the display. [. . . ] Adjust the position of the panel in various ways for maximum comfort. Tilt Range : -5°~15° -5 15 Do not touch or press the screen when adjusting the angle of the monitor. ERGONOMIC It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt angle of the monitor should not exceed 5 degrees. 7 Connecting the Display Connecting with the PC W1943TB/W2043TE/W2243T 1. Before setting up the monitor, ensure that the power to the monitor, the computer 2. Connect signal input cable 1 system, and other attached devices is turned off. A Connect D-sub(Analog signal) Cable B Connect DVI-D(Digital signal) Cable 2 in order, then tighten the screw NOTE This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown. When using a D-Sub signal input cable connector for Macintosh Mac adapter : For older Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. Varies according to model. Wall-outlet type DVI-D (This feature is not available in all countries. ) 3. Press the power button on the front panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. (Only Analog Mode) Power Button NOTE ` Self Image Setting Function'?This function provides the user with optimal display settings. When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution. 8 Connecting the Display Connecting with the PC W1943SB/W2043SE/W2243S 1. Before setting up the monitor, ensure that the power to the monitor, the computer 2. To access a control, use the or Buttons. When the icon you want becomes highlighted, press the AUTO/SET Button. Use the / Buttons to adjust the image to the desired level. Use the AUTO/SET Button to select other sub-menu items. Press the MENU Button once to return to the main menu to select another function. Press the MENU Button twice to exit from the OSD. 12 On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. Select the function you want and press the [MENU] button to save the setting. Active state Inactive state Main menu Sub menu MOVIE Description For moving images in videos or movies. INTERNET For text images (Word processing etc. ). USER USER You can manually adjust ACE or RCM. You can save or restore the adjusted value even when using a different condition. · ACE (Adaptive Clarity Enhancer): Selects the clarity mode. Not applied Weak clarity and luminosity contrast. Strong clarity and luminosity contrast. To adjust the USER sub-menu function, press the AUTO/SET Button · RCM (Real Color Management): Selects the color mode. Not applied MENU : Exit : Decrease : Increase SET : Select another sub-menu Green enhance Salmon color tone Color Enhance NORMAL DEMO This is under normal operating conditions. * Normal mode is when f-ENGINE is turned off. [. . . ] Or, you can also download the driver from our web site: http://www. lge. com. · Make sure to check if the video card supports Plug&Play function. 22 Specifications Display 18. 51 inches (47. 01 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 47. 01 cm 0. 30 x 0. 30 mm (Pixel pitch) Horizontal Freq. Input Form 30 - 61 kHz (Automatic) 56 - 75 Hz (Automatic) Separate Sync. SOG (Sync On Green), Digital W1943TB Sync Input Video Input Signal Input Input Form 15 pin D-Sub Connector DVI-D Connector (Digital) RGB Analog (0. 7 Vp-p/ 75 ohm), Digital VESA 1360 x 768 @60 Hz VESA 1360 x 768 @60 Hz Resolution Plug&Play Power Consumption Dimensions & Weight Max Recommend DDC 2B On Mode Sleep Mode Off Mode : 21W(Typ. ) 1W 1W Without Stand Width 44. 90 cm / 17. 68 inches Height 29. 05 cm / 11. 44 inches Depth 5. 85 cm / 2. 30 inches 3. 3 kg (7. 28 lbs) With Stand Width 44. 90 cm / 17. 68 inches Height 36. 10 cm / 14. 21 inches Depth 18. 30 cm / 7. 20 inches Weight(excl. [. . . ]