User manual LG L1520BFEX-TM

[. . . ] Use the wall mount according to the international specifications. · · 1-4 Connecting with a PC The connecting part may differ depending on the product model. 1. Connect the product to a PC depending on the video output supported by the PC. · When the graphics card provides D-Sub (analog) output · Connect the [RGB IN] port of the product to the [D-Sub] port of the PC with the D-Sub cable. · When the graphics card provides DVI (digital) output · Connect the [DVI IN 1/DVI IN 2] port of the product to the DVI port of the PC with the DVI cable. . 2. Connect one end of the power cord to the POWER port of the product and connect the other end of the power cord to the 220V or 110V wall outlet. Installing the Product 1-4 (The input voltage is switched automatically. ) POWER S/W ON [ ] / OFF Switches the LCD Display On/Off. When the product is connected to a PC, you can turn the product on and use it. [. . . ] Tie the Kensington lock cable to a desk or heavy object. You can purchase the locking device from an electronics store, an online shop, or our service center. 1-6 Product Operating Buttons Product Operating Buttons Icon MENU Description Press this button to view the On Screen Display (OSD). This button is also used to exit the OSD or to return to a higher-level OSD menu * OSD Adjustment Lock This function locks the OSD in order to maintain the current settings or to prevent the settings from being changed by another person On: If you press and hold the MENU button down for 5 seconds, the OSD Adjustment Lock function is activated. Off: If you press and hold the MENU button down for 5 seconds again, the OSD Adjustment Lock function is disabled. Even if the OSD Adjustment Lock function is activated, users can adjust the brightness and contrast and can set up the adjustment function assigned to the [ ]. / Use these buttons to navigate the menu or to adjust a value in the OSD. Users can set the Customized Key to one of the following functions. If the user presses the Customized Key[ ] after setting it, the configured function will be performed <MagicBright> - <MagicColor> - <Color Effect> - <Image Size> You can set the function of the Customized Key by selecting "SETUP&RESET -> Customized Key" in the OSD. When OSD is not on the screen, push the button to adjust brightness. /SOURCE Use this button to select a function If you press the [ /SOURCE] button when there is no OSD, the input signal (Analog/Digital 1/Digital 2) is switched. When the input signal is switched by pressing [ /SOURCE] button or the product is turned on, a message displaying the selected input signal appears at the top left of the screen. ) To select digital mode, you have to connect the product and the PC with the DVI cable. Installing the Product 1-6 Icon AUTO Description Press [AUTO] button to adjust the screen settings automatically This function is only available in analog mode. If the resolution settings are changed in the Display Properties, the AUTO adjustment function is performed. Press this button to turn the product on or off · · The buttons on the right of the product are touch-type buttons. Set up the graphics card referring to the user manual. Troubleshooting 2-1 The display area suddenly moves to an edge or to the center. Did you change the graphics card or the driver?Did you change the resolution and frequency appropriate to the product?Please press the [AUTO] button to run the auto adjustment function. Set the resolution and the frequency to the appropriate values in the graphics card refer to the (Standard Signal Mode Table) Is the graphics card configured correctly?Set up the graphics card referring to the user manual. Did you change the resolution and the frequency appropriate to the product?Set the resolution and the frequency to the appropriate values in the graphics card refer to the (Standard Signal Mode Table) The color is displayed in 16 bit (16 colors). The color has been changed after changing the graphics card. Did you install the device driver for the product?Windows ME/XP/2000 : Set the color again by selecting Control Panel Display Settings. [. . . ] Check if all the Plug&Play (VESA DDC) functions are supported referring to the User Manual of the graphics card. Install the device driver referring to the descriptions about the driver installation. Install the device driver referring to the descriptions about the driver installation. When I look at the exterior edges of the product, small alien substances appear on it. Since this product is designed so that the color has a soft appearance by coating it with a transparent material over the black edges, such things may be seen. [. . . ]