User manual LG L1760TR-BF

[. . . ] The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily accessible after installation. Operate the display only from a power source indicated in the specifications of this manual or listed on the display. If you are not sure what type of power supply you have in your home, consult with your dealer. [. . . ] Press the downside of the stand base with your left hand as shown in the picture. 3. With your left hand pressing the stand base, press the folding button using your right hand. To release the folding, relieve the pressure on the left hand slowly with your right hand still pressing the folding button. 5. A spring is clicked on and the stand is brought out by itself from the standbase as shown in the picture. Pull out the stand as shown in the picture and the stand will hold up. A3 Connecting the Display Folding the stand base 1. Face the front of the monitor and push the monitor backwards, following the sequence shown in the picture. This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. Do not touch or apply force to the monitor screen while expanding or folding the stand base. Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range :0°~30 2. The direction of the arrow indicates the direction to fold the product. It does not indicate the degree of the usage. Ergonomic It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt angle of the monitor should not exceed 5 degrees. A4 Connecting the Display Using the Computer 1. When attached, tighten the thumbscrews to secure the connection. The following section is an outline of the available adjustments and selections you can make using the OSD. NOTE Allow the display to stabilize for at least 30 minutes before making image adjustments. To make adjustments in the On Screen Display, follow these steps: MENU -+ AUTO/SET -+ MENU Touch the MENU Button, then the main menu of the OSD appears. To access a control, use the - or + Buttons. When the icon you want becomes highlighted, touch the AUTO/SET Button. Use the - / + Buttons to adjust the image to the desired level. Use the AUTO/SET Button to select other sub-menu items. Touch the MENU Button once to return to the main menu to select another function. Touch the MENU Button twice to exit from the OSD. Automatic save With the OSD open, once you have made an adjustment the monitor automatically save any adjustments you have made, even if you exit the menu or open another menu. If you make an adjustment and then wait for the OSD to disappear, the adjustment will also been saved. A9 On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. Main menu PICTURE Sub-menu BRIGHTNESS CONTRAST GAMMA COLOR PRESET RED GREEN BLUE HORIZONTAL VERTICAL TRACKING CLOCK PHASE SETUP LANGUAGE OSD HORIZONTAL A D Reference To adjust the brightness, contrast and gamma of the screen To customize the color of the screen 6500K 9300K POSITION To adjust the position of the screen To improve the clarity and stability of the screen To customize the screen status for a user's operating environment POSITION VERTICAL WHITE BALANCE POWER INDICATOR FACTORY RESET FLATRON MOVIE/TEXT F-ENGINE( - ) USER To select or customize desired image settings NORMAL : Adjustable A : Analog Input D : Digital Input NOTE The order of icons may differ depending on the model (A10~A14). A10 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Touch the MENU Button, then the main menu of the OSD appears. Menu Name PICTURE Icons Sub-menus Button Tip MENU : Exit - + : Adjust (Decrease/Increase) SET : Enter : Select another sub-menu NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. A11 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description To adjust the brightness of the screen. [. . . ] The message "OSD UNLOCKED" should appear. A15 Troubleshooting Display image is incorrect Display Position is incorrect. Touch the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. [. . . ]