User manual LG L1800PM(LB886F-SL)

[. . . ] Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] 9 1-3. ControlsandFunctions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Chapter2 ConnectingCables. . . . . . . . . . . . . . . . . . . . . . . . . . 11 2-1. ConnectionProcedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 . WhenusedasaPCmonitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Whenusingvideoequipment. . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2. AdjustingtheScreenAngle. . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2-3. InstallingtheTouchPanelDriver. . . . . . . . . . . . . . . . . . . . 2-4. CalibratingtheMonitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Chapter3 SettingsandAdjustments. . . . . . . . . . . . . . 15 3-1. BasicOperationandFunctions. . . . . . . . . . . . . . . . . . . . . . 15 3-2. ColorAdjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Configure other settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * Select the below driver from the [Supported Controllers] window. - [DMC, TSC-10 Series, Serial] 4 Connect the monitor to the PC with the included RS-232C signal cable. Connectors on the PC COM port RS-232C Cable (supplied) Connectors on the monitor Serial port for the touch panel 5 Restart the PC. 2-4. Calibrating the Monitor Calibrate the monitor according to the instruction manual for the touch panel driver on the CD-ROM. 1 Chapter 2 Connecting Cables Chapter 3 Settings and Adjustments 3-1. Basic Operation and Functions Basic operation of Setting menu 1 2 Displaying Setting Menu Press . Setting/Adjusting 3 Exiting Choose [Exit] with NOTE or , and press . · Keeping pressed for 2 seconds will also exit the Setting menu. Chapter 3 Settings and Adjustments 1 Functions The settings adjustable in the Setting menu are as shown below. The availability of items depends on the input signal. : Configurable : Not configurable Tab Color Setting / adjustable item Brightness Contrast Black Level Sharpness Saturation Hue PC Settings Clock Phase Position Range Adjustment Color Mode Red/Green/Blue Reset Reset Others Video Aspect Power Save Reverse Crosshair Color Width Beep Language Touch Panel Information PC Video page 18 Reference page 17 1 Chapter 3 Settings and Adjustments 3-2. Color Adjustment This will perform color adjustments. Please switch between the input screens you want to adjust and adjust them one by one. Adjustable item / adjustable value Brightness Contrast Black Level Sharpness Saturation Hue PC Settings*1 0 - 30 0 - 30 0 - 30 Off/Low/High -30 - +30 -30 - +30 Clock Phase Position Range Adjustment Color Mode*2 Red/Green/ Blue Reset Reset *1 Adjusting Adjusts the brightness of the backlight. Adjust this when the screen appears to flicker or blur. Adjust this when the display positioning is misaligned. Provides automatic adjustment when you want every color gradients displayed. 1/2/3 0 - 128 Select Color Mode (1/2/3) to adjust the colors of red, green and blue in several modes. Resets the state adjusted with [PC Settings] to the factory default. [. . . ] The Afterimage can be removed gradually by changing the displayed image. Clock The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in use, when the analog input signal is converted to a digital signal for image display. If the clock pulse is not set correctly, some vertical bars appear on the screen. Phase Phase means the sampling timing to convert the analog input signal to a digital signal. Phase adjustment is made to adjust the timing. It is recommended that phase adjustment be made after the clock is adjusted correctly. Range Adjustment Range adjustment controls the signal output levels to display every color gradation. [. . . ]