User manual LG L1900J-BF

[. . . ] Contact your dealer if the display is not operating properly. To Avoid Personal Injury : Do not place the display on a sloping shelf unless properly secured. Use only a stand recommended by the manufacturer. Do not drop an object on or apply impact to the product. [. . . ] Place the display in a built-in enclosure unless proper ventilation is provided. Cover the openings with cloth or other material. Place the display near or over a radiator or heat source. Main power breaker is the power cord and this breaking device must be located at a location where it is easy to operate. Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active Matrix LCD permanently. Do not press the LCD screen with your finger for a long time as this may cause some afterimages. Some dot defects may appear as Red, Green or Blue spots on the screen. However, this will have no impact or effect on the display performance. If possible, use the recommended resolution to obtain the best image quality for your LCD display. If used under any mode except the recommended resolution, some scaled or processed images may appear on the screen. However, this is characteristic of the fixed-resolution LCD panel. On Cleaning Unplug the display before cleaning the face of the display screen. 10) Click "Finish" after selecting "Yes, I want to restart my computer now. " 11) Forte Manager execution icon is created on background screen when installation is completed. *Select [Execution] after pressing [Start] button when installation screen does not appear automatically. **Select OK after entering D: \SETUP. EXE (assumed CD-ROM Drive is D:\. ) Tip To use monitor with the best quality~ ~ Install Users Guide CD monitor driver file provided with accessories. * Please refer to 'Monitor Driver Installation Guide' to install monitor driver. A5 Install Forte Manager program. Forte Manager Program Function To change or adjust Tracking, Brightness, Contrast, Position, Resolution, Sharpness or Preset of Display, use or select Forte Manager program. *Tracking and Position are supported only when signal is in analog mode. PICTURE - Tracking, Brightness, Contrast, Position, Resolution, Sharpness, Wizard, Preset f-Engine - MOVIE, TEXT, NORMAL, USER, Preset Color - Color Temp. RGB, Color Calibration, Preset Options - Preferences, Power Indicatort, Preset Support - Update, Help, Asset Id, Version, Preset A6 Control Panel Functions L1900E Front Panel Controls Rear Control Power Button Function Product may be turned on when you touch the button, and turned off when you touch it once again. * Check Power Indicator after touching Power Button. Power Indicator Power indicator is blue or red when the product is on, and it automatically blinks in Sleep mode(Energy Saving. ) NOTE To turn on/off the power indicator manually ~ ~ Select Options of Forte Manager Program -> Power Indicator -> On/Off to manually turn on/off the power indicator. A7 Control Panel Functions L1900J Front Panel Controls L1900J-BF Control Power Button Function Product may be turned on when you touch the button, and turned off when you touch it once again. Power Indicator is blue or red when the product is on Power Indicator and it automatically repeats from dark to bright mode in Sleep mode (Energy Saving). [L1900J] The button underneath the picture is for adjusting brightness of Power Indicator. * Four-grade brightness adjustment is possible by lightly touching with a finger. [L1900J-BF] The button underneath the picture is for turning on/off Power Indicator. * To turn on/off Power Indicator, touch lightly with a finger. NOTE Power Button is not operated before Display is completely exhibited. A8 DDC/CI ON/OFF Function DDC/CI(Display Data Channel Command Interface) is communication protocol for communications between PC and monitor. [. . . ] Adjust by selecting Forte Manager Program --> Picture --> Tracking --> Phase if adjusted condition is dissatisfactory. · Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. [. . . ]