User manual LG L2000CE-BF

[. . . ] The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily accessible after installation. Operate the display only from a power source indicated in the specifications of this manual or listed on the display. If you are not sure what type of power supply you have in your home, consult with your dealer. [. . . ] They make an ideal container in which to transport the unit. When shipping the unit to another location, repack it in its original material. On Disposal The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority. A2 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Connecting the stand base or Removing the stand base 1. Place the monitor with its front facing downward on a cushion or soft cloth. Align the hooks on the stand body with the matching slots in the base of the monitor. Insert the hooks into slots. Warning: The tape and locking pin may only be removed from those monitors equipped with a standing base when the base is pulled up. Otherwise, you may be injured by the protruding sections of the stand. Hook Slot 4. Use a coin on the back of the stand base and turn the screw clockwise to tighten. When you desire to disintegrate the monitor from the stand base, use a coin to turn the screw counterclockwise. Screw 100 100 Important This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. The default setting is D-Sub. A6 Control Panel Functions Control AUTO/SET Button Function Use this button to enter a selection in the On Screen Display. AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO/SET button before entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is 20 inch monitor : 1600 x 1200 Power Button Use this button to turn the display on or off. Power Indicator This Indicator lights up blue when the display operates normally(On Mode). If the display is in Sleep Mode (Energy Saving), this indicator color changes to amber. A7 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. NOTE Allow the display to stabilize for at least 30 minutes before making image adjustments. To make adjustments in the On Screen Display, follow these steps: Press the MENU Button, then the main menu of the OSD appears. To access a control, use the - or + Buttons. When the icon you want becomes highlighted, press the AUTO/SET Button. Use the - / + Buttons to adjust the image to the desired level. Use the AUTO/SET Button to select other sub-menu items. Push the MENU Button once to return to the main menu to select another function. [. . . ] Use this function to set the power indicator on the front side of the monitor to ON or OFF. If you set ON at any time, the power indicator will automatically be turned on. Restore all factory default settings except "LANGUAGE. " Press the + button to reset immediately. MENU SETUP - + SET MENU - + SET POWER MENU : Exit INDICATOR - : Adjust + : Adjust SET : Select another sub-menu FACTORY RESET If this does not improve the screen image, restore the factory default settings. If necessary, perform the white balance function again. [. . . ]