User manual LG L332-BP

[. . . ] OWNER'S MANUAL Color Video Camera Please read this manual carefully before operating your set and retain it for future reference. MODEL L332-BN/BP/CP CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. REGULATORY INFORMATION: FCC Part 15 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Set the WDR limit. 26 Menu Operation WDR LIMIT: LOW y MIDDLE y HIGH ACE (Adaptive Contrast Enhancement) : This function is used when you want to display dark areas of WDR brightly. BLC: Camera's backlight compensation feature helps alleviate issues of visibility in high contrast areas. > > > BLC LIMIT: LOW y MIDDLE y HIGH HSBLC: Use for masking brightness of the specific area to view the subject more clearly. The HSBLC mode is automatically activated only in low luminance scene. > AREA SETTING: Use [LEFT] or [RIGHT] button to select a area then use [UP] or [DOWN] button to select ON or OFF. Press [SET] to exit the Area setting menu. GRAY SCALE: Use [LEFT] or [RIGHT] button to select a gray scale. USER SCALE: Use [LEFT] or [RIGHT] button to select a bright level. (5 level) MASK: Use [LEFT] or [RIGHT] button to select [ON] or [OFF]. If you set the MASK to ON, the mask function is activate only when the HSBLC is automatically activated in low luminance scene. > · · Brightness setting You can increase the brightness of the darkened video. If you set the brightness to lower value, the image is darkened. If you set the brightness to higher value, the image gets bright. · > > 1. Use [LEFT] or [RIGHT] button to set the bright level. 27 Menu Operation AGC (Automatic Gain Control) setting If the images are too dark, change the maximum [AGC] value to make the images brighter. SHUTTER (Shutter Speed) setting Select the desired shutter speed for camera exposure. You can change the shutter speed to higher speed to capture fast-moving subjects, though the image becomes darker. 1. Use [LEFT] or [RIGHT] button to select a mode. Use [LEFT] or [RIGHT] button to set shutter speed. FLKy1/160, . . . , 1/120 000 ALC2 mode: 1/160, . . . , 1/120 000) Note: If you set the shutter speed value in ALC2 mode, it is maximum value. When the camera is activated with ALC2 mode, the shutter speed is arrived maximum value and then 28 Menu Operation the camera is change to iris control mode automatically for the camera exposure. Anti-flicker mode is not supported in the ALC2 mode. If you want to use it, select ALC mode . · Note: If you set to one of the SHUTTER options except AUTO on the [SHUTTER] menu the [SENS-UP] setting is not available and [---] mark is displayed. [. . . ] The USER TITLE is displayed on the upper left of the screen. To disappear the user title, select [OFF]. Select [USER TITLE] option on the [SPECIAL] screen. Use [LEFT] or [RIGHT] button to select a [ON] then press [SET]. [. . . ]