User manual LG L3700A

[. . . ] The information in this document is provided "as is" without warranty of any kind, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, and is subject to change without notice. The warranties for Hewlett-Packard products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty. This document contains proprietary information that is protected by copyright. [. . . ] After adjusting the function, select Save and Return, or Cancel if you don't want to save the setting, then select Exit from the Main Menu. NOTE If the buttons remain untouched for 10 seconds while displaying a menu, new adjustments will be discarded and the settings will revert to previous settings and exit the menu. ENWW Adjusting the Monitor Settings 23 OSD Menu Selections The following table lists the On-Screen Display (OSD) menu selections and their functional descriptions. After changing an OSD menu item, and if the menu screen has these options, you may choose to: Cancel--to return to the previous menu level. Save and Return--to save all changes and return to the OSD Main Menu screen. This Save and Return option is only active if you change a menu item. Reset--to change back to the previous setting. Table 4-2 OSD Menu Icon Main Menu Brightness Contrast Image Control Auto Adjustment Horizontal Position Vertical Position Custom Scaling (not available on LP1965 model) Adjustable scale Submenu Description Adjusts the brightness level of the screen. The factory default range is 50 or 90, depending on the model. Adjusts the contrast level of the screen. Adjusts the position of the screen image left and right. Adjusts the position of the screen image up and down. Selects the method on how displayed information on the monitor will be formatted. Adjust to view the background information through the OSD. Selects and displays important information about the monitor. Provides the recommended resolution mode and refresh rate for the monitor. Reports the serial number of the monitor. The serial number is needed if contacting HP technical support. Reports the firmware version of the monitor. Reports the total hours of backlight operation. Selects the default or primary video input signal when the monitor is connected to two active and valid video sources. The monitor will automatically determine the video format. DVI-I#1 DVI­I#2 Selects DVI-I 1 input. This input accepts either analog or digital signals. [. . . ] This compliance is indicated by the following conformity marking placed on the product: This marking is valid for non-Telecom products and EU harmonized Telecom products (e. g. Bluetooth) This marking is valide for EU nonharmonized Telecom products. 44 Appendix C Agency Regulatory Notices ENWW *Notified body number (used only if applicable -- refer to the product label). German Ergonomics Notice HP products which bear the "GS" approval mark, when forming part of a system comprising HP brand computers, keyboards and monitors that bear the "GS" approval mark, meet the applicable ergonomic requirements. The installation guides included with the products provide configuration information. Japanese Notice Korean Notice Power Cord Set Requirements The monitor power supply is provided with Automatic Line Switching (ALS). This feature allows the monitor to operate on input voltages between 100­120V or 200­240V. [. . . ]