User manual LG L6004RA

[. . . ] The user could lose the authority to operate this equipment if an unauthorized change or modification is made. REGULATORY INFORMATION: FCC Part 15 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. [. . . ] Assemble the camera and mounting bracket. Connect the unit by following step a and b. 15 Installation Wall mount (Optional) Follow the instructions below to install the camera with a wall mount. Drill holes in the wall where you want to install the wall mount. Install the wall mount and camera installation bracket assembly as shown below. Connect the cables to the camera jack and attach the camera to the camera installation bracket assembly. Pipe threads should be clean and rust free. Use a sealer (such as TeflonTM tape and silicone sealer) on the threads. 16 Installation 4. Attach the camera to the installation bracket assembly. Image Adjustment You can manually adjust the pan/tilt/azimuth angles, focus, and zoom while observing the connected monitor. Do not hold the camera by lens unit to adjust panning, tilting, or azimuth. The video output to the BNC will be interrupted while a portable monitor is connected to the video jack. Use the supplied wrench to loosen the screws and remove the dome cover Remove the Dome cover and lans cover. 17 Installation 2. Connect a portable monitor to the video jack. Press [SET] button and the EXPOSURE menu appears. Use [LEFT] or [RIGHT] button to select a mode then press [SET]. · WDR: WDR (Wide dynamic range) feature can be very helpful to cope with very challenging lighting conditions. It is capable of capturing both of the dark part and bright part and combining the differences into a scene to generate a highly realistic image as original scene. Set the WDR limit. 25 Menu Operation · BLC: Camera's backlight compensation feature helps alleviate issues of visibility in high contrast areas. HSBLC: Use for masking brightness of the specific area to view the subject more clearly. The HSBLC mode is automatically activated only in low luminance scene. AREA SETTING: Use [LEFT] or [RIGHT] button to select a area then use [UP] or [DOWN] button to select a [ON] or [OFF]. Press [SET] to exit the Area setting menu. > GRAY SCALE: Use [LEFT] or [RIGHT] button to select a gray scale. (GRAY, D. GRAY, BLACK) > USER SCALE: Use [LEFT] or [RIGHT] button to select a bright level. [. . . ] Note: If you set the [STABILIZER] to ON, the Digital zoom is set to [x1. 1] automatically. 34 Menu Operation Setting the D-ZOOM (Digital Zoom ) level You can select the digital zoom level. · TILT: Use [LEFT] or [RIGHT] button to move the screen. (up or down) Setting the D-EFFECT (Digital effect) You can select the digital effect. 1. 2. Select [D-ZOOM] option on the [SPECIAL] menu. [. . . ]