User manual LG L9322

[. . . ] MODEL L9322 Series 1 Safety Information This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-insulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. [. . . ] (0~5) COLOR: Use [Near] or [Far] button to select a color. OFF: Not used. Brightness Setting You can increase the brightness of the darkened video. If you set the brightness to lower value, the image is darkened. If you set the brightness to higher value, the image gets bright. Select [BRIGHTNESS] option on the [EXPOSURE] menu. Use [Near] or [Far] button to set the bright level. 25 Shutter (Shutter Speed) Setting Select the desired shutter speed for camera exposure. You can change the shutter speed to higher speed to capture fastmoving subjects, though the image becomes darker. Select [SHUTTER] option on the [EXPOSURE] menu. Use [Near] or [Far] button to set shutter speed. SENS-UP Setting If pictures are not clear due to darkness, use this function to increase the sensitivity of picture. Select [SENS-UP] option on the [EXPOSURE] menu. Use [Near] or [Far] button to set the SENS-UP limit. To set the SENS-UP function, select the [AUTO] on the [SHUTTER] NOTE If you set to one of the SHUTTER options except AUTO on the [SHUTTER] menu, the [SENS-UP] setting is not available and [---] mark is displayed. White Balance Setting Select the method by which the camera shifts its output colors to compensate for the color of a light source 1. 2. Select [WHITE BALANCE] option on the [CAMERA SET] menu. Use [Near] or [Far] button to select a mode then press [Open] or [Close]. ATW (Auto-Tracing White Balance): In this mode, the color temperature range for the proper white balance is approximately from 1700K to 11000K. Proper white balance may not be obtained under the following conditions: When the color temperature is out of the 1800K to 11000K range When the scene mostly contains high color temperature objects, such as a blue sky or sunset When the scene is dim. AUTO: In this mode, the color temperature range for the proper white balance is approximately 3500 K to 6500 K. Proper white balance may not be obtained under the following conditions: When the color temperature is out of the 3500K to 6500K range. When the scene mostly contains high color temperature objects, such as a blue sky or sunset. When the scene is dim. 26 MANUAL: You can set the white balance options manually. - COLOR TEMP: Use [Near] or [Far] button to select a function. INDOOR: The color temperature range for the proper white balance is approximately 3600K. OUTDOOR: The color temperature range for the proper white balance is approximately 6500K. - RED: Set the desired red value. (-100 to 100) BLUE: Set the desired blue value. [. . . ] Use [Near] or [Far] button to set it [ON]. Press [Open] or [Close] button. 4. Select [NORMAL] option and select [Open] or [Close] option. OPEN: Activate the alarm in the close position. CLOSE: Activate the alarm in the open position. 5. [. . . ]