User manual LG LAC-2800R

[. . . ] Always operate the vehicle in a safe manner. Do not become distracted by the vehicle while driving, and always be fully aware of all driving condition. Do not change settings, or any functions. Pull over in a safe and legal manner before attempting such operations. [. . . ] Install the unit into the installation sleeve. 4 5 6 3 2 1 2 1 3 4 5 6 Control panel Control panel Slide the unit into the ISO-DIN frame. Slide the unit and frame into the dash opening. Install the dash panel or adapter plate. Install the control panel to the unit. Removing the existing receiver unit A If there is already an installation sleeve for the receiver unit in the dashboard, it must be removed. 1 2 Remove the rear support from the unit. Remove the control panel and trim ring from the unit. Insert the lever A into the hole on one side of the unit. Perform the same operation on the other side and pull the unit out from the mounting sleeve. A 3 6 CAR CD/MP3/WMA Receiver Connection Before connecting, make sure that the ignition switch is set to OFF, and remove the battery # terminal to avoid short circuits. 1 2 1 2 3 4 3 4 5 6 5 6 7 8 7 8 B A Power Antenna A5 Power Antenna(Blue) A6 Dimmer(Pink) A7 To Ignition(Red) A4 To Battery(+)(Yellow) A8 Ground(-)(Black) Control Relay Dimmer Switch Ignition Switch B1 B2 B3 BATTERY B B B B B B B B 1 2 3 4 5 6 7 8 Violet : Rear Right + Violet/ Black Stripe : Rear Right ­ Gray : Front Right + Gray / Black Stripe : Front Right ­ White : Front Left + White/Black Stripe : Front Left ­ Green : Rear Left + Green/ Black Stripe : Rear Left ­ B4 B5 B6 B7 B8 A1, A2, A3 : Not connected CAR CD/MP3/WMA Receiver 7 Basic Operation ON PLAYER 1. PWR/MUTE SRC VOLUME + or - Basic operation - more you can do Mute Press PWR/MUTE to cut the sound. To cancel it, press again. right now. AUX (Auxiliary) ON / OFF It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit. AUX (Auxiliary) 00dB / +6dB You can adjust the volume level of each source to prevent radical changes in volume when switching between sources. You may be surprised at a loud sound when you change the source from the external component to another source. DEMO OFF/ ON You can change the initial indication on the display to information name (function name, EQ name, etc. . . ) while listen to a source. BEEP 2ND / ALL BEEP 2ND : The beep is generated when a key is long pressed. (1 sec) BEEP ALL : The beep is generated when any key is pressed. Changing the general settings 1 Press and hold SEL/MENU so that one of menu items appears. 2 Press SEL/MENU and press + or - to select one of the settings specified belows. 3 Press and hold SEL/MENU finish the setting. AF(Alternative frequency) ON / OFF When the reception quality drops, the tuner automatically changes to another station in the network, broadcasting a better reception quality, using the PI and AF codes. REG (Region) ON / OFF REG ON : The unit switches to another station, within the same network, broadcasting the same program when the receiving signals from the current station become weak. REG OFF : The unit switches to another station, within the same network when the receiving signals from the current station become weak. [. . . ] Press RPT again to cancel it. Shuffle Press or press and hold SHF on the player. Each files in the current selected folder ( SHF) of all of the tracks/files (SHF) on the disc is played randomly. Press SHF again to cancel it. 10 CAR CD/MP3/WMA Receiver Troubleshooting Symptom Cause Correction General Power doesn't turn on / The Leads and connectors are not properly. The fuse is blown. CD No sound is heard / The volume level will not rise. [. . . ]