User manual LG LAC-M5600

[. . . ] There are no user-serviceable parts inside. Refer servicing to qualified service personnel. To reduce the risk of fire or electric shock, do not expose this product to dripping or splashing water, rain, or moisture. Caution When being connected in a wrong way, the unit displays as follows. Antenna port short : "ANTENNA ON PORT SHORT CIRCUIT CHECK" 2. Remote port short : "REMOTE ON PORT SHORT CIRCUIT CHECK" 3. [. . . ] Push the right side or panel into the unit until it clicks. 1 2 3 4 Press the " " (RELEASE) to open the control panel. Hold the right part of the control panel. Place the control panel in the supplied protective case. 2 3 1 Caution · The control buttons may not work properly if the control panel is not attached properly. If this occurs, gently press the display. 4 · Do not leave the control panel in any area exposed to high temperatures or direct sunlight. · Do not drop the control panel or otherwise subject it to strong impact. · Do not allow such volatile agents as benzine, thinner, or insecticides to come into contact with the surface of the control panel. Control panel Protective Case Note Periodically wipe the contacts on the back of the control panel with a cotton swap moistened with alcohol. For safety, turn off the ignition before cleaning, and remove the key from the ignition switch. CAR CD/MP3/WMA Receiver 5 ENG 2 Installation ISO-DIN Installation 1 2 4 5 6 2 3 1 Basic Installation Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. 3 4 5 6 1 2 3 4 Control panel Remove the existing receiver unit. Install the unit into the installation sleeve. Slide the unit and frame into the dash opening. Install the dash panel or adapter plate. Install the control panel to the unit. Bend the claws according to the thickness of the dashboard Control panel Battery Installation 1 2 3 Removing the existing receiver unit If there is already an installation sleeve for the receiver unit in the dashboard, it must be removed. 1 2 3 A Pull out the battery holder with a sharp product like a ball point pen. The indicator lights up in the following order. POP t CLASSIC t ROCK t OFF Adjusting the sound level Press SEL [S] (SEL on the remote control) repeatedly to select the mode you want to adjust from volume, balance and fader. 8 CAR CD/MP3/WMA Receiver Listening to the Radio ON PLAYER SRC S SRC BAND Press . bb/BB> Hold . bb/BB> BAND - ?m/M?Manual seek. Auto search memory Press and hold AS/PS for more than 1 second. The six strongest broadcast frequencies will be stored under preset button 1-6 in the order of their signal strength. To cancel, press AS/PS. Storing and recalling broadcast frequencies 1 Press BAND to select desired band you want to store. 2 Select the desired frequency and press one of preset buttons 1-6 and hold until the beep sound. 3 Repeat steps 1-2 to preset other stations. The next time, you press the same preset button, the radio station frequency is recalled from the memory. To scan the preset stations Press AS/PS. To cancel, press AS/PS. To tune in the preset stations Press BAND to select the desired band and press the desired preset button 1-6 (preset button 1-6 on the remote control). Note · Up to 24 stations, 6 for each of three FM bands and 6 MW(AM) stations can be stored in the memory. · When a station is stored on the preset numbers on which another station of the same band has already been preset, the previously preset station is automatically erased. CAR CD/MP3/WMA Receiver 9 ENG Listening to the radio - more you can do Listening a CD ON PLAYER Rotate PWR VOLUME Note During random playback, if you press - . (?m m on remote control), you won't go back to the previous track. Shuffle ON REMOTE Press or press and hold SHF on the player or on remote control. The current selected folder ( SHF) or all of the tracks/files (SHF) on the disc is played randomly. [. . . ] The tag gives the Title, Artist or Album. Press DISP repeatedly during MP3/WMA/CD TEXT file playback. If there is no information, "NO TEXT" will be shown in the display window. Note move on remote control to move the files/track. Intro scan Press or press and hold SCAN on the player or on remote control. [. . . ]