User manual LG LAC3800R

[. . . ] Always operate the vehicle in a safe manner. Do not become distracted by the vehicle while driving, and always be fully aware of all driving condition. Do not change settings, or any functions. Pull over in a safe and legal manner before attempting such operations. [. . . ] WHITE FL+ WHITE/BLACK STRIPE FLGRAY FR+ GRAY/ BLACK STRIPE FRGREEN RL+ GREEN/ BLACK STRIPE RLVIOLET RR+ VIOLET/ BLACK STRIPE RR- 9 Connection C Speaker Connections A From antenna B To the wiring of the vehicle colors of leads. 8 7 6 5 4 3 2 1 · BLACK · ORANGE · PINK L FRONT : This lead is for the ground connection. : This lead is for the phone line connection. : This lead is for the dimmer line connection. : This lead is for connection to the power supply terminal when the ignition switch is set to ACC. : This lead is for connection to the battery (back-up) terminal from which power is always supplied. : This lead is for the power antenna connection. · RED · YELLOW R · BLUE L REAR · BLUE/WHITE : This lead is for the remote amplifier on connection. R Connecting to Auxiliary Equipment (Optional) Connect the AUDIO OUTPUT connector of this unit to the AUDIO INPUT connector of the Auxiliary Equipment. L (Left) R (Right) To AUDIO OUT To AUDIO IN 10 Basic operation Turning the unit on Press the PWR/MUTE (POWER/MUTE on the remote control) or any other button. Note When you insert the CD in the CD slot, the unit turns on. Turning the unit off Press the PWR/MUTE (POWER/MUTE on the remote control) for more than 1. 2 seconds. Selecting a source Press the SRC repeatedly to select a source. The indicator lights up in the following order: Tuner CD Tuner. . . Adjusting the volume Press the VOL+/- (Press the VOLUME U u on the remote control) to adjust sound level. : LAC3800R Note When you turn the unit off, the current volume level is automatically memorized. Whenever you turn the unit back on, it will operate at the memorized volume level. Checking the clock You can see the clock pressing DISP (DISP. on the remote control). Mute 1 2 Press PWR/MUTE (POWER/MUTE on the remote control) to cut the sound. To cancel it, press PWR/MUTE (POWER/MUTE on the remote control) again. XDSS (Extreme Dynamic Sound System) Press and hold the EQ/XDSS to reinforce treble, bass and surround effect. music group t speech group t search off 3 Short press one of the preset station 1 ~ 6. Each time this button is pressed, the display mode changes as follows. Music group Pop M, Rock M Easy M, Light M. Classics, Other M Jazz, Country Nation M, Oldies Folk M No 1. Speech group News, Affairs, Info Sport, Educate, Drama Culture, Science, Varied Weather, Finance, Children Social, Religion, Phone In Travel, Leisure, Document Note RDS is only available for FM reception. 14 RDS operation RDS mode adjustment 1 2 3 Press the SEL for morre than 2 seconds activate the select mode. : LAC-M0600R Press the VOL/SEL for morre than 2 seconds. : LAC3800R After, press the SEL repeatedly to select each mode. : LAC-M0600R After, press the VOL/SEL repeatedly. : LAC3800R Press the VOL+/- (Press VOLUME U u on the remote control) to select the indicator. : LAC3800R TA ALARM PI SOUND BEEP 2ND TA SEEK PI MUTE BEEP ALL TA ALARM mode When a newly tuned station has no TP information for 5 seconds, a double beep sound is output. TA SEEK mode When the newly tuned station does not receive TP information for 5 seconds, the receiver retunes to the next station which has the same PI as the last station, but has the TP information. [. . . ] If there is no information, "NO TEXT" will be shown on the display window. Press the DISP repeatedly during MP3/WMA file playback. MP3/WMA TRACK -10/+10 MP3 WMA (If there is no folder or one folder. ) During playback, press F- to go back to 10 tracks, and press F+ to go forward to the next 10 track. MP3/WMA FOLDER UP/DOWN MP3 WMA (If there are more than two folders. ) During playback, press F- to go back to the previous folder, and press F+ to go forward to the next folder. Note The time display appearing on the display part when playings VBR file may vary and there may be some difference from the actual time (both progress time and VBR are displayed at the same time when playing file). 17 Troubleshooting Symptom Power doesn't turn on. Cause Leads and connectors are not properly connected. Correction Confirm once more that all connections are correct. [. . . ]