User manual LG LAC-4810R

[. . . ] Always operate the vehicle in a safe manner. Do not become distracted by the vehicle while driving, and always be fully aware of all driving condition. Do not change settings, or any functions. Pull over in a safe and legal manner before attempting such operations. [. . . ] Insert the lever A into the hole on one side of the unit. Perform the same operation on the other side and pull the unit out from the mounting sleeve. 2 3 Pull out the battery holder with a sharp product like a ball point pen. Put the battery with and correctly on the battery holder. Push the battery holder back into its original position. A 3 Note · Use only one CR2025 (3V) lithium battery. · Remove the battery if the remote control is not used for a long period of time. · Do not leave the product in a hot or humid place. · Do not handle the battery with metallic tools. · Do not store the battery with metallic materials. 6 CAR CD/MP3/WMA Receiver Connection Before connecting, make sure that the ignition switch is set to OFF, and remove the battery # terminal to avoid short circuits. 1 2 1 2 3 4 3 4 5 6 5 6 7 8 7 8 B A Phone Mute(Orange) Remote On(Blue/White) Amplifier (Optional) Amplifier (Optional) To Audio in Front Left Rear Left Front Right Rear Right To Audio out Power Antenna A5 Power Antenna(Blue) A6 Dimmer(Pink) A7 To Ignition(Red) A4 To Battery(+)(Yellow) A8 Ground(-)(Black) Control Relay Dimmer Switch Ignition Switch B1 B2 B3 BATTERY B4 B5 B6 B7 B8 B B B B B B B B 1 2 3 4 5 6 7 8 Violet : Rear Right + Violet/ Black Stripe : Rear Right ­ Gray : Front Right + Gray / Black Stripe : Front Right ­ White : Front Left + White/Black Stripe : Front Left ­ Green : Rear Left + Green/ Black Stripe : Rear Left ­ A1, A2, A3 : Not connected CAR CD/MP3/WMA Receiver 7 Basic Operation ON PLAYER 1. PWR SOURCE Rotate PWR ON REMOTE POWER SRC VOLUME XDSS+ (Extreme Dynamic Sound System) Press and hold EQ/XDSS+. (XDSS+ : Improves the treble, bass sound. ) To cancel it, press again. Note When EQ and XDSS+ is set to "Off", you can adjust the sound level (BAS, MID, TRB) settings. Basic operation - more you can do Mute Press MUTE/PWR (POWER cancel it, press again. on the remote control) to cut the sound. To Checking the clock You can see the clock pressing DISP (DISP. on the remote control). Changing the general settings 1 Press MENU (press and hold SEL/MENU on remote control) so that one of menu items appears. 2 Press MENU (SEL/MENU on remote control) and Rotate PWR. (Press VOLUME on the remote control. ) to select one of the settings specified belows. - For more details about setting information, refer to page 12. 3 Press and hold MENU (SEL/MENU on remote control) to finish the setting. Listening RDS broadcasting ON PLAYER 1. RDS broadcasting information Press and hold the PTY repeatedly for selecting each mode. Music group t Speech Group t Search off NO. CLASSICS, OTHER M JAZZ, COUNTRY NATION M, OLDIES FOLK M NO. [. . . ] REG (Region) ON / OFF REG ON : The unit switches to another station, within the same network, broadcasting the same program when the receiving signals from the current station become weak. REG OFF : The unit switches to another station, within the same network when the receiving signals from the current station become weak. (This mode, the program may differ from the one currently received. ) TA(Traffic Announcement) ALARM / SEEK TA ALARM : When a newly tuned station has no TP information for 5 seconds, a double beep sound is output. TA SEEK : When the newly tuned station does not receive TP information for 5 seconds, the receiver retunes to the next station which has the same PI as the last station, but has the TP information. [. . . ]