User manual LG LAC7800R

[. . . ] 17 · Adjusting the Balance and Fader of speaker . 18 Using the hands free (LAC7800R model) . 20 · RDS (Radio Data System) Menu Operation . 22-23 - TA (Traffic Announcement Identification) . [. . . ] A second press of MENU/RDS will take you back to initial screen. RDS (Radio Data System) is a method for sending information signals together with the transmitter signals. Your tuner is capable of translating these signals and putting the information on the display. These codes contain the following information. Program Service Name (PS), A list of program Type (PTY), Traffic Announcement (TA), Clock Time (CT), Radio Text (RT) NOTE Some RDS stations may not choose to include some of these additional features. If the data required for the selected mode is not being transmitted, the Display Window will show a NO Clock, PTY None, RT None message. OPERATION - PI (Program Identification) : contains additional information for regional program operation - AF (Alternative Frequencies for the actual program) - TP (Traffic Program Identification) - TA (Traffic Announcement Identification) - EON (Enhanced Other Networks): Information on other programs to use their services like traffic announcement etc NOTES · RDS is only available for FM reception. · The PS function allows station names to be displayed in clear letters. · Network Tracking reception uses the PI and AF codes. The PI code identifies the country, area and broadcast system. AF lists up which reception frequencies at the area are broadcasting the same program and automatically changes to the best reception quality offering frequency without the need to interrupt the program by a seek function. · Traffic programmes and announcements can be automatically received using the TP/TA features. In this case also a high advanced RDS function cannot help anymore, another program ­ of the driving area must be selected. · Especially in regional mode such reception borderland can be often reached. Because of possible reduced reception quality, the regional function shall be used only for driving short distances. · If the RDS station does not support AF data list or if the tuner cannot read AF data from reception, no network tracking is possible. Switching to alternative frequencies does not work. OPERATION RDS data for preset buttons When a preset button is pressed, if the station with that frequency is received with a sufficient quality, the receiver will tune to that frequency. When the reception quality is not sufficient for good reception, referring to its AF list, the receiver will change to a station of the same program which is broadcasting the best reception quality (a station broadcasting the same program contents may not be received when "REG OFF" is selected and a regional program is selected). If a sufficient quality station cannot be found in the AF list, PI-seek tuning starts automatically. Station B broadcasting on frequency B. Station E broadcasting on frequency E. NOTE The same program can be received on different frequencies. PI SEEK procedure: If the reception quality drops too much without finding a better quality alternative frequency from the AF list, after a while the PI SEEK function starts (Display: `Seek-PI'). The tuner is searching a station of the same program not regarding the AF list, which has the same PI code. If such station is not available even after PI SEEK has checked the whole FM band, PI SEEK stops. 23 MENU Operation TA (Traffic Announcement Identification) ALARM RDS AF TA CONFIG SEEK When newly tuned station does not receive TP information for 5 sec, the radio retunes to next station which has not the same station(PI) as the last station, but has the TP information. When TP information gets lost at the current station for retune time which is set by "Retune Short" (30 sec) or "Retune Long" (90 sec), the radio start to retune to next same PI station. When same PI station does not catch in 1 cyclic search, the radio retunes to next station with TP information. [. . . ] There are many different types of recordable disc formats (including CD-R/CD-RW containing MP3 or WMA files). That require certain pre-existing conditions (see above) to insure compatible playback. Customers should also note that permission is required in order to download MP3/WMA files and music from the Internet. Our company has no right to grant such permission. [. . . ]