User manual LG LB-H0850QC

[. . . ] Remote controller Name Wireless remote controller Model name Appearance (Packed with the indoor unit) Application Function ·E Start / Stop ·E Changing mode ·E Temperature setting ·E flow changing (5 step) Air ·E Clock ·E Timer function - ON/OFF timer (10 min. step) - Everyday timer ·E High power mode ·E ECO mode (Sleep timer wtih ECO-logic) ·E One-touch pre-set memory ·E One-touch Auto (*1) (Note. 1) Super MMS can not accept "AUTO" mode, Super HRM can accept "AUTO" mode. 1-3. Wiring Design Model MMK-AP0072H LB-H0850QC MMK-AP0122H Legend MCA MOCP WH-H2UE 50Hz Voltage Min Max 198 264 198 264 198 264 Fan Motor kW FLA 0. 03 0. 20 0. 03 0. 21 0. 03 0. 22 FLA kW Nominal Voltage (V-Ph-Hz) 230-1-50 230-1-50 230-1-50 Power Supply MCA MOCP 0. 24 15 0. 26 15 0. 27 15 : Minimum Circuit Amps : Maximum Overcurrent Protection (Amps) : Full Load Amps : Fan Motor Rated Output (kW) 1-4. [. . . ] Accessories Accessory parts name Wired remote controller Simple remote controller Wireless remote controller kit Central remote controller Weekly timer Model RBC-AMT21E RBC-AS21E TCB-AX21E TCB-SC642TLE RBC-AS21E Remarks with separeted reciever unit Max. 64 group / unit Use with RBC-AMT21WE 2. Technical Specifications High Wall type (2 Series) Model name Cooling / Heating capacity (Note 1) Power Supply Electrical Characteristics 50Hz MMK(kW) AP0072H 2. 2 / 2. 5 AP0092H 2. 8 / 3. 2 AP0122H 3. 6 / 4. 0 (Power exclusive for indoor is required. ) 1 phase 50Hz 230V (220-240V) 0. 18 0. 018 0. 23 Moon white Moon white Moon white Running current Power consumption Starting current Suction grille and side panel (A) (kW) (A) 0. 17 0. 017 0. 22 0. 19 0. 019 0. 24 Appearance Discharge grille Bottom surface Outer dimension Total weight Heat exchanger Height x Width x Depth (mm) (kg) 275 x 790 x 208 11 Finned tube Non-flammable insulation Cross-flow fan Soundproof/Heat-insulating material Fan Fan unit Standard air flow (High/Mid/Low) Motor Air filter Controller (Note 3) Gas side Connecting pipe Liquid side Drain port (mm) (mm) (Nominal dia. ) (dB(A)) 35-32-29 (m3/h) 480 / 420 /360 510 / 450 / 360 30 540 / 450 / 360 Standard filter attached (Simple filter) (WH-H2UE, Packed with indoor unit) Wireless remote controller 9. 5 6. 4 17 (Polyvinyl chloride tube) 36-33-29 37-33-29 Sound level (Note 2) (High / Mid / Low) Note 1 : The cooling capacities and electrical characteristics are measured under the conditions specified by JIS B 8615 based on the reference piping. The reference piping consists of 5 m of main piping and 2. 5 m of branch piping connected with 0 meter height. Note 2 : The sound level are measured in an anechoic chamber in accordance with JIS B8616. Normally, the values measured in the actual operating environment become larger than the indicated values due to the effects of external sound. Note 3 Note 4 : : Wireless remote controller is packed with indoor unit. Wired remote controller (RBC-AMT21E, RBC-AS21E) can be also connected. Rated conditions Cooling : Indoor air temperature 27 C DB/19 C WB, Outdoor air temperature 35 C DB Heating : Indoor air temperature 20C DB, Outdoor air temperature 7C DB/6C WB 2 3. Automatic controls for quick cooling and heating No remote controller sensor OK OK OK Hi-POWER FILTER RESET - OK OK OK - 1. Automatic operation mode can not be accepted by heat pump system. If trainsmission is sent as auto mode, operation la mp and timer lamp of the indoor unit will light up with the beep as the notice. In this case, change the other operation mode to release the notice. ( Heat recovery system can accept automatic operation by using this wireless remote controller. ) 2. Group control by using the wired remote controller (WH-H2UE) is not available. If it is done, incorrect action or display disagreement may occur. [. . . ] Group control by using the wired remote controller (WH-H2UE) is not available. If it is done, incorrect action or display disagreement may occur. A wired remote controller is required for the group control. [. . . ]