User manual LG LD-1420T1

[. . . ] The user could lose the authority to operate this equipment if an unauthorized change or modification is made. REGULATORY INFORMATION: FCC Part 15 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. [. . . ] The mail options are dimmed. l l Sensor On: - ON: Sends an e-mail when a sensor has occurred. - OFF: Not used. SMTP Server: Enter the SMTP Server address using the virtual keyboard. If notification is set to ON and the SMTP server option is empty, the SMTP port no. , user name, and password options are dimmed and the options are not set. SMTP Port: Enter the SMTP Port Number using the virtual keyboard. However in some cases it is better to change this port number for added flexibility or security. If desired change the port number (1 ~ 65535). User Name: Enter the user name using the virtual keyboard. Password: Enter the password using the virtual keyboard. TLS: Set to ON when using the TLS (Transport Layer Security) function. Mail Address (1-3): Enter the mail address using the virtual keyboard. E-mail Test: Select [E-mail Test] to test send an e-mail. l l Motion Detection: - ON: Sends an e-mail when an motion detection has occurred. NTP Test: Select [NTP Test] to test the NTP server. l l l l l l l l Date: Enter the current date. (24 HR or 12 HR) Date Format: Select the date display format. Time Format: Select the time display format. 38 Buzzer l Password: Enter or change the password for the user using the virtual keyboard. You can use the password with number, special character or characters. (Minimum 4 length, Maximum 8 length). Note: Remember the password. If you forget the password please contact an authorized service center or the store where you purchased the system. Update l Button - ON: Makes a sound when using the buttons. Sensor - ON: Makes a sound when a sensor occurs. Motion - ON: Makes a sound when a motion is detected. System - ON: Makes a sound when the HDD has bad sector. - OFF: Turns off the system buzzer. The update feature allows you to upgrade DVR software and add/upgrade PTZ protocols. In this case, the current DVR settings are not deleted or replaced during the update process. l l l Note: The buzzer is a low sound on this unit. [. . . ] When a normal power-supplying cable is used instead of the video cable, screen noise can be generated. Check the type of sensor in the camera setting is the same as with the connected sensor. The connected sensor is not operating. Check the system is set to use the sensor in the recording schedule window in the recording setting menu. Check the sensor is properly connected to the SENSOR-IN. Check the system is set to use the PTZ camera in the camera setting menu. The connected PTZ camera is not operating. Check the power cable of the PTZ camera is properly connected. [. . . ]