User manual LG LD-14AW1

[. . . ] 21 Items not suitable for dishwashers: . 24 Positioning rail (depending on model) . 31 Cutlery basket (depending on model) . 42 Cleaning the door and the door seal . [. . . ] Follow the manufacturer's instructions on the label and apply sparingly with an even pressure following the direction of the grain. Cleaning the wash cabinet The wash cabinet is largely self-cleaning, provided that the correct amount of detergent is always used. If, however, there are limescale or grease deposits in the cabinet these can be removed with a proprietary dishwasher cleaner, such as the Miele dishwasher cleaner (available from the Miele UK Spare Parts Department). Cleaning the door and the door seal ^ Wipe the door seals regularly with a damp cloth to remove food deposits. ^ When the dishwasher is being loaded, food and drink residue may drip onto the sides of the dishwasher door. These surfaces are outside the wash cabinet and are not accessed by water from the spray arms. Any soiling should be wiped off these surfaces before the door is closed. E-Cloth ^ A microfibre "E-Cloth" is available from the Miele UK Spare Parts Department, which is suitable for cleaning surfaces such as stainless steel, glass, plastic and chrome without the use of chemicals. 42 Cleaning and care Cleaning the control panel , Do not use abrasive cleaning agents, glass cleaning agents or all-purpose cleaners. Because of their chemical composition they could cause serious damage to surfaces. Plastic panels: ^ This type of control panel should only be wiped with a damp cloth or suitable cleaning agent designed for use on plastic. Stainless steel panels: ^ Control panels made of stainless steel should be cleaned using a damp cloth and a little washing up liquid, or a proprietary non-abrasive cleaning agent designed specifically for use on stainless steel (do not use it on the controls). ^ To help prevent re-soiling, a proprietary conditioning agent for stainless steel, such as Neoblank (available from the Miele UK Spare Parts Department) can also be used. Follow the manufacturer's instructions on the label and apply sparingly with an even pressure following the direction of the grain. The following guide may help you to find the reason for a fault, and to correct it. You should, however, note the following: , Repairs should only be carried out by a suitably qualified and trained person in accordance with current local and national safety regulations. Unauthorised or incorrect repairs could cause personal injury or damage the appliance. Technical problems Problem The display remains dark and the Standby indicator light is not flashing after the dishwasher has been switched on with the On/Off sensor pad s. The dishwasher stops during a programme. Possible cause The appliance is not plugged in. Remedy Insert the plug and switch on at the socket. Reset or replace the fuse. The fuse is defective or has tripped. Reset or replace the fuse. 47 Problem solving guide Problem The buzzer sounds. The following fault message appears in the display: Technical fault FXX. Call the Service Department. Possible cause Remedy The buzzer sounds. The following fault message appears in the display: Waterproof fault F70 There may be a technical ­ Switch the dishwasher off fault. After a few seconds: ­ Switch the dishwasher back on. [. . . ] OK ° ^ Confirm with OK that the dishwasher should be signed on to the Miele|home system. You can cancel the signing on process with Cancel. ^ Confirm the messages displayed with OK. If signing on is unsuccessful: ^ Check that the Miele|home system is active. [. . . ]