User manual LG LD-2140WH

[. . . ] 31 2 Contents Additional options . 36 General problems with the dishwasher . 52 Cleaning the drain pump and non-return valve . 59 3 IMPORTANT SAFETY INSTRUCTIONS WARNING ­ When using your dishwasher, follow basic precautions, including the following: Electrical Safety ~ Before installation, make sure that Read all instructions before installation or use of the dishwasher to prevent injury and machine damage. [. . . ] If the door is closed, the program will continue from where it was interrupted. Changing a program If the detergent flap is already open, do not change the program. If a program has already started and you wish to change it: ^ Press and hold the "Start/Stop" button for at least one second. ^ Select the desired program and start as usual. , Open the door with care. Before closing the door again, leave it ajar for approx. This will enable the temperature in the wash cabinet to settle. Close the door firmly until it clicks into place. 31 Additional options Options With the "Options" button the functions "Turbo" and "Tab" can be selected. ^ Turn the dishwasher on "K" . The "Start/Stop" indicator flashes. ^ Press the "Options" button until the desired function lights up. The option will remain active for all programs until the setting is changed again. ^ A program can now be started as usual or the dishwasher can be turned off "K". Tab To achieve the best results, the dishwasher can be programmed for the type of detergent being used. If you press and hold the "Delay Start" button the time with automatically count up to 24^. To start again at 30 minutes, press the "Delay Start" button twice. ^ Press the "Start/Stop" button. The time will count down to the program start: in 1-hour-steps over 10 hours, in 1-minute-steps under 10 hours. Once the delay start time has elapsed, the selected program starts. The display shows the remaining time, the "Delay Start" indicator goes out and the "Start/Stop" indicator lights. Delay start display Up to 59 minutes: e. g. 30 minutes = 30 Between 1 h and 9 h 30 min: e. g. 15 h = 15^ Starting a program before the delay start has elapsed A program can be started before the delay start time has elapsed. ^ Press and hold the "Start/Stop" button for at least one second. The "Delay Start" indicator goes out and the "Start/Stop" indicator flashes. [. . . ] If there is any question concerning the proper electrical connection or grounding of this appliance to the power supply, please consult a licensed electrician or call Miele's Technical Service Department: U 1-800-999-1360 V 1-800-565-6435 Specifications The dishwasher comes equipped with a 4 ft (1. 2 m) power cord with a molded plug for connection to 120 V, 60 Hz, 15 A grounded receptacle. 57 Plumbing Waterproof system All Miele dishwashers have a safety valve located on the incoming water line and a sealed underside with a water sensor. If a fault occurs, the water intake is stopped and the drain pump is activated. Providing the dishwasher was installed correctly by a Miele technician, the waterproof system will protect you from water damage throughout the lifetime of the machine. ­ The water inlet hose comes equipped with a 3/4" female hose thread connector. [. . . ]