User manual LG LD15X740P2B

[. . . ] 11:16 LED DOWNLIGHT Application of high-efficiency LED technology allows for tremendous energy reduction and its excellent heat management solution allows a life expectancy of 50, 000 hours or more, making it an environmentally friendly product. Advantages Excellent Alternative Significant energy savings over 42% through replacement compared to conventional 26/52W downlight. Existing lamp 42% or more increase in energy efficiency LG DOWN 15W Energy Saving by High Efficiency Annual electricity cost 22€ (Unit: EUR) Annual maintenance cost (Unit: EUR) 32€ Up to 76% energy saving yearly compared to conventional downlight lamp. 42% 13€ 76% Annual cost reduction 42€ 22€ 13€ Replacement Cost Annual electricity Cost Downlight LG Down 15W Downlight LG Down 15W ※ Based on 12 hrs operation per day, electricity cost €0. 2/kwh and 0. 54 times replacement. ※ Calculation result may differ by the lamp unit price, usage conditions and product lifetime. Eco-friendly Eco-friendly light source, which contains no mercury and low CO2 emission. CO2 emission (Unit: kgCO2) 128. 7 56% 56. 9 ×19 Downlight LG DOWN 23W ※ Based on 12 hrs operation per day yearly. [. . . ] -6- MFL67082801, REV06, . indd 6 11. 11:16 WARNING Do not cover the device with clothes or paper, or place it near inflammables. • Otherwise, it may cause malfunction of the device or fire. Keep some distance between the lamp and the object to be illuminated. • If the illumination distance is too close or if the illumination is on a material's surface, this may cause discoloration or deformation of the object or cause fire. Do not use the device for purposes other than illumination. (which include warming food, drying clothes, using under water, using as a search light, fishing or other events. ) • Otherwise, it may cause fire or electric shock. CAUTION • Do not wipe the surface with inflammables, such as alcohol, benzene, and acetone. • Do not use the device in places with corrosive gases. • The color and the brightness of the lamp may differ even among the same model because the LED light source has "light dispersion". -7- MFL67082801, REV06, . indd 7 11. 11:16 Product Configuration and Information, Size Product Configuration Converter Diffuser Plate Main Body Spring Front Cover ※ Product Configuration may vary depending on the product. Product Information Category 3000K Product 4000K Verification 5000K 5700K 4 Inch 8W LD08X730M2B. D00***0 LD08X740M2B. D00***0 LD08X750M2B. D00***0 LD08X757M2B. D00***0 6 Inch 15W 23W LD15X730P2B. D00***0 LD25X730P2B. D00***0 LD15X740P2B. D00***0 LD25X740P2B. D00***0 LD15X750P2B. D00***0 LD25X750P2B. D00***0 LD15X757P2B. D00***0 LD25X757P2B. D00***0 8 Inch 37W LD40X730R2B. D00***0 LD40X740R2B. D00***0 LD40X750R2B. D00***0 LD40X757R2B. D00***0 ※ 23W and 37W products are not suitable for covering with thermally insulating material. ※ Asterisk(*) will vary by model. Product Size “B” “C” “A ” (Unit: mm) 4 inch 6 inch 8 inch Ceiling Cut-out Ø 100±5 Ø 155±5 Ø 200±5 “A” Ø 120 Ø 180 Ø 223 “B” 90 145 187 Category -8- “C” 88 100 111 MFL67082801, REV06, . indd 8 11. 11:16 Installation WARNING Make sure to turn off the main power switch off the installation space before connection. Connect so that the colors of the 3 power cables match. (LIVE: BROWN, NEUTRAL: BLUE, P. E. : GREEN/YELLOW) LIVE NEUTRAL P. E. Interior wiring of the building Product’s power cables 1 Drill and prepare the ceiling so that it can accommodate the product (refer to page 8 for product size). 2 Connect the 3 product cables to the interior wiring of the building. For finishing cap, use standardized products. [Completed installation] 3 -9- Connect the 3 product cables to the interior wiring of the building. [. . . ] (“LGE”) with respect to the lighting product packaged with this limited warranty. Your Product , when delivered to you in new condition in its original packaging, is warranted against defects in materials or workmanship as follows: for a period of three (3) years from the date of original purchase, defective parts or a defective Product returned to LGE, or its authorized service providers, as applicable, and proven to be defective upon inspection, will be repaired, or exchanged for a new Product, as determine by LGE, or the authorized service provider. [. . . ]