User manual LG LD-N20715SW

[. . . ] Getting to know your dishwasher Before using your appliance for the first time . Setting up the water softener Filling with rinse aid . . en Safety instructions Delivery Immediately check the packaging and dishwasher for any damage which may have been caused in transit. Do not use a damaged appliance, but consult your supplier. [. . . ] The programme sequence of the automatic programmes "Auto Super Wash", "Auto Wash" and "Auto Delicate Wash" is automatically adjusted to the amount and degree of soiling of the utensils. As a result, the energy and water consumption is kept as low as possible. You can use the following programme overview to select a suitable programme for type of utensils as well as for quantity and/or condition of food remains. Auto Wash Options Start When the appliance has been switched on, the "Auto Wash" programme is always displayed in the main menu. 18 en Programme overview Type of utensil e. g. Type of food remains e. g. Hardwearing Mixed Fragile Mixed Soups, soufflés, sauces, potatoes, pastries, rice, eggs, fried food Soups, potatoes, pastries, rice, eggs, fried food Coffee, cake, milk, sausage, cold drinks, salads Rinse if the utensils have been left for several days prior to washing in the dish washer Amount of food remains Condition of food remains Very adhesive Large -> small Slightly adhesive Very small Wash programme AUTO SUPER WASH 60° - 70° AUTO WASH 45° - 55° AUTO DELICATE WASH 35° - 45° QUICK WASH 35° PRERINSE ONLY Programme progress Prerinse The programme progress is optimised and adjusted according to the appliance load and degree of soiling on the utensils. Clean Intermediate wash Final wash Drying 19 en Programme data The programme data (duration, energy and water consumption) can be found in the summary of instructions and refers to standard conditions. Greater deviations may be caused by: different quantities of utensils inlet temperature of the water water pressure ambient temperature mains voltage tolerances and appliance-specific tolerances (e. g. temperature, water flow rate, etc. ) Only ranges can be indicated for the automatic programmes. The water consumption values refer to water hardness value 4. Selecting options/ standard settings Operating principle Auto Wash Options Start The following options / standard settings can be selected in turn from the main menu by repeatedly pressing the "Options" button : Timer programming Reduce time Degree of dryness Buzzer volume Water hardness Rinse aid dosage Language Standard programmes One option / standard setting contains several settings which can be selected or buttons. with the The selected setting is saved by jumping to the next option / standard setting (button ) (exception: standard programmes) or by returning to the main menu (button ). 20 en Timer programming You can delay the start of the programme by up to 24 hours in ½ hour steps. If the Timer programming option is selected, "Delay start 0:00 hrs" is displayed. Return to the main menu and start the selected programme. If selecting a language code, the clear text is displayed on the lower line in the corresponding language. Standard programmes In addition to the wash programmes which can be selected from the main menu, the following standard programmes can be selected in turn from the "Normal" programme: Normal Extra ­ Normal Eco ­ Normal ­ Normal Plus. Select the desired programme and return to the main menu. If you do not want to select any of the displayed standard programmes, return to the "Standard programmes" display and then to the main menu by pressing the "Back" button . If you would like to cancel the selection of a standard programme, select the Standard programmes option. Then simultaneously press the "Main menu" button and button or button . The selected standard programme is then deleted. The main menu and "Auto Wash" programme are displayed. Normal Extra Normal Eco Normal Normal Plus Type of utensil Amount of food remains Condition of food remains Mixed utensils Small to large Slightly adhesive The associated programme data (duration, energy and water consumption) can be found in the summary of instructions. We strongly recommend that you use the automatic programmes as the energy and water consumption is kept as low as possible on account of the variable programme sequence. However, the programme sequence of the standard programmes is fixed. 22 en Starting the programme Before starting the appliance, check again that the spray arms can rotate freely. In the main menu press the "Start" button . "Close door" is displayed alternating with the expected programme duration. [. . . ] When replacing the appliance, always connect a new water supply hose to the water supply. The old supply hose must not be re-used. Ensure that the fresh water connection is not kinked, crushed or twisted. Water pressure: Minimum 0, 5 bar ­ maximum 10 bar. [. . . ]