User manual LG LD-S5811ST

[. . . ] Technical data Environment concerns Installation The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance. General information and tips Environmental information Subject to change without notice 4 Safety information SAFETY INFORMATION Before the installation and use, read this manual carefully: · For your safety and the safety of your property. · For the correct operation of the appliance. Always keep these instructions with the appliance also if you move or give it to a different person. [. . . ] · The display shows the setting of the water softener (example: Press the Multitab button again and again to change the setting. Deactivate the appliance to confirm. 7. 8. If the water softener is set electronically to the level 1, the salt indicator stays off. 12 Use of dishwasher salt USE OF DISHWASHER SALT How to fill the salt container 1. Turn the cap counterclockwise and open the salt container. Fill the salt container with 1 litre of water (only for the first time you fill with salt). Use the funnel to fill the salt container with salt. Remove the salt around the opening of the salt container. Turn the cap clockwise to close the salt container. The programme duration can increase if you use the multitab function. Activate or deactivate the multitab function before the start of a washing programme. You cannot activate or deactivate the function when a washing programme operates. Activating the multitab function · Press the Multitab button, the multitab indicator comes on. Make sure that the appliance is in setting mode. · The programme time flashes in the display. · The phase indicators of the set washing programme come on. Press the Start button, the washing programme starts automatically. · The phase indicators go off but the indicator of the phase in operation stays on. Starting the washing programme with delay start 1. Make sure that the appliance is in setting mode. Set the washing programme. 16 Select and start a washing programme 5. Press the Delay button again and again until the display shows the time of the delay start. · The time of the delay start flashes in the display. Press the Start button, the countdown starts automatically. · The delay start time flashes no more in the display. [. . . ] If the hot water comes from alternative sources of energy, (e. g. solar panels, photovoltaic panels and aeolian), use a hot water supply to decrease energy consumption. ENVIRONMENT CONCERNS The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. [. . . ]