User manual LG LDW2010F

[. . . ] OWNER'S MANUAL Network Dome Camera Please read this manual carefully before operating your set and retain it for future reference. MODEL LDW2010F P/NO : MFL62591934 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. REGULATORY INFORMATION: FCC Part 15 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Hostname: Enter the hostname you want to use. · Save: Click this button to confirm the settings. 36 Operation and settings IP list > Basic policy: Select the basic policy type. Allow all: Allow all the IP address basically, but the IP addresses in the list are denied. Deny all: Deny all the IP address basically, but the IP addresses in the list are allowed. It needs at least one IP address to activate this function. Save: Click this button to confirm the settings. Add: Click this button to add the IP address. From: Enter the start IP address for the IP filtering. To: Enter the end IP address for the IP filtering. Note: If you want to deny or to allow a range of IP addresses, enter the start IP address to "From" and the end IP address to "To". You can also add an IP address by entering the IP address to "From" and "To". Repeat the steps 1 to 3 to add additional IP address. Remove: Click this button to delete the IP address. The IP address will be deleted. · · User settings Basic The default user ID of this IP device are [admin] (Administrator) and [anonymous] (Custom user). If your user ID is registered as an administrator, you can register a new user and provide the access rights for each user. A maximum of 50 users can be created. 37 Operation and settings 3. (Should have a minimum of 4 characters and preferably a combination of alphanumeric). To confirm the password, retype the password that you typed in the Password box. Select the authority drop down list to provide the access rights to each user and then click the [Save] to confirm your selection. Administrator: Allows you to operate setup menus and to view live images. Power user: Use of the limited functions of the system (The Configuration menu is not allowed. A power user can use the Live View, PTZ control, OSD control and audio functions. [. . . ] · · · · · The sound card needs to be checked for its support for full duplex communication. Ensure that the mute button of the client computer is not set and all the audio settings are correct. Speaker button on the web viewer should be enabled to listen the audio from the network camera. Ensure that the bidirectional audio button is enabled on the Web viewer and the microphone is set. [. . . ]