User manual LG LE2104D-NH

[. . . ] DIGITAL VIDEO RECORDER OWNER'S MANUAL MODEL: LE2104 LE2104D Before connecting, operating or adjusting this product, please read this owner's manual carefully and completely. AB28 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. FCC WARNING: This equipment may generate or use radio frequency energy. [. . . ] The confirmation window will be displayed to change your host name. Notification · Sensor On: ON: Sends an e-mail when a sensor has occurred. ON: Sends an e-mail when an motion detection has occurred. ON: Sends an e-mail when the HDD has fully recorded. ON: Sends an e-mail when the administrator password has changed. ON: Sends an e-mail when a video signal from the camera has stopped because of a cable disconnection or malfunction of a camera. When host name is properly changed, the changed host name will be displayed in [Registered Host]. Note: If host name is not changed after updating, please check network connection. · Motion Detection: - · Disk Full: - Admin PWD. Changed: · Video Loss: - · - Power On/Off: Connections and settings 33 Mail Emergency · Notification ON: Notifies the user of unit operating information by e-mail according to notification settings. OFF: The notification function is not used. The mail options are not set. · Notification: ON: Notifies the emergency agent about unit operating information according to your notification settings. If you set to OFF, the Emergency ID, IP Address and Port options are not set. - · SMTP Server: Enter the SMTP Server address using the virtual keyboard. If notification is set to ON and the SMTP server option is empty, the SMTP Port, User Name, Password and TLS options are not set. SMTP Port: Enter the SMTP Port Number using the virtual keyboard. However in some cases it is better to change this port number for added flexibility or security. If desired change the port number (1 ~ 65535). User Name: Enter the user name using the virtual keyboard. Password: Enter the password using the virtual keyboard. TLS: Set to ON when using the TLS (Transport Layer Security) function. Mail Address (1-3): Enter the mail address using the virtual keyboard. E-mail Test: Select [E-mail Test] to test send an e-mail. · · · Emergency ID: Select the emergency ID of the emergency agent program. IP Address: Enter the IP address of the emergency agent program using the virtual keyboard. [. . . ] Check the sensor is properly connected to the ALARM-IN. Check the system is set to use the PTZ camera in the camera setting menu. Check the power cable of the PTZ camera is properly connected. The connected PTZ camera is not operating. Check the signal cable of the PTZ camera is properly connected. Check the selected channel to control the PTZ camera. [. . . ]