User manual LG LF-K5932A

[. . . ] HOW TO REPLACE THE MAIN PARTS 11-1 Indoor Unit 11-2 Microcomputer 11-3 Outdoor Unit 12. EXPLODED VIEWS AND PARTS LIST 12-1 12-2 12-3 12-4 12-5 Indoor Unit (E-Parts Assy) Indoor Unit Outdoor Unit (LF-K5932A) Outdoor Unit (RAS-16UAV-E) Outdoor Unit (E-Parts Assy) -2- FILE NO. Specifications Unit model Current limited Cooling capacity Cooling capacity range Heating capacity Heating capacity range Power supply Electric characteristics Indoor Outdoor (kW) (kW) (kW) (kW) Indoor Operation mode Running current Power consumption Power factor Operation mode Running current Power consumption Power factor Starting current High (Cooling / Heating) Medium (Cooling / Heating) Low (Cooling / Heating) (Cooling / Heating) Height Width Depth RAS-13UKV-E3 LF-K5932A -- 3. 5 0. 9 4. 0 4. 2 0. 9 6. 0 220 240V 1Ph 50/60Hz Cooling Heating 0. 15 0. 15 30 30 87 87 Cooling Heating 4. 84 5. 16 1040 1100 93 94 5. 31 3. 27/3. 72 39/39 33/34 26/28 48/50 RAS-13UKV-E3 275 790 208 10 30 530/620 LF-K5932A 550 780 270 37 750 Twin rotary type with DC-inverter variable speed control DA91A1F-45F 43 2410/2410 Flare connection 6. 35 9. 52 6. 35 9. 52 15 15 10 R410A 0. 8 3 Wires: includes earth (Outdoor) 4 Wires: includes earth 21 32 / 0 28 10 43 / 10 24 1 1 1 2 (3. 1 x 16L) 1 1 2 6 (4 x 25L) 1 1 1 (A) (W) (%) (A) (W) (%) (A) (dBA) (dBA) (dBA) (dBA) (mm) (mm) (mm) (kg) (W) (m3/h) (mm) (mm) (mm) (kg) (W) Outdoor COP (Cooling / Heating) Operation noise Indoor Indoor unit Outdoor Unit model Dimension Net weight Fan motor output Air flow rate (Cooling / Heating) Outdoor unit Unit model Dimension Height Width Depth Net weight Compressor Motor output Type Model Fan motor output Air flow rate (Cooling / Heating) Piping connection Type Indoor unit Liquid side Gas side Outdoor unit Liquid side Gas side Maximum length (Per unit) Maximum chargeless length Maximum height difference Refrigerant Name of refrigerant Weight Wiring connection Power supply Interconnection Usable temperature range Indoor (Cooling / Heating) Outdoor (Cooling / Heating) Accessory Indoor unit Installation plate Wireless remote control Remote controller holder Flat head wood screw Bioenzyme filter Zeolite filter Batteries Mounting screw Installation manual Owner's manual Outdoor unit Drain nipple (W) (m3/h) (m) (m) (m) (kg) (C) (C) The specification may be subject to change without notice for purpose of improvement. SVM-04013 Unit model Current limited Cooling capacity Cooling capacity range Heating capacity Heating capacity range Power supply Electric characteristics Indoor Outdoor (kW) (kW) (kW) (kW) Indoor Operation mode Running current Power consumption Power factor Operation mode Running current Power consumption Power factor Starting current High (Cooling / Heating) Medium (Cooling / Heating) Low (Cooling / Heating) (Cooling / Heating) Height Width Depth (A) (W) (%) (A) (W) (%) (A) (dBA) (dBA) (dBA) (dBA) (mm) (mm) (mm) (kg) (W) (m3/h) (mm) (mm) (mm) (kg) (W) Outdoor COP (Cooling / Heating) Operation noise Indoor Indoor unit Outdoor Unit model Dimension Net weight Fan motor output Air flow rate (Cooling / Heating) Outdoor unit Unit model Dimension Height Width Depth Net weight Compressor Motor output Type Model Fan motor output Air flow rate (Cooling / Heating) Piping connection Type Indoor unit Liquid side Gas side Outdoor unit Liquid side Gas side Maximum length (Per unit) Maximum chargeless length Maximum height difference Refrigerant Name of refrigerant Weight Wiring connection Power supply Interconnection Usable temperature range Indoor (Cooling / Heating) Outdoor (Cooling / Heating) Accessory Indoor unit Installation plate Wireless remote control Remote controller holder Flat head wood screw Purifying filter Zeolite filter Batteries Mounting screw Installation manual Owner's manual Outdoor unit Drain nipple (W) (m3/h) (m) (m) (m) (kg) (C) (C) RAS-16UKV-E RAS-16UAV-E -- 3. 5 0. 9 4. 0 4. 2 0. 9 6. 0 220 240V 1Ph 50/60Hz Cooling Heating 0. 2 0. 2 30 30 65 65 Heating Cooling 7. 20 8. 32 1590 1620 96 85 8. 05 2. 85/3. 41 45/44 40/40 34/34 51/53 RAS-16UKV-E 275 790 208 10 30 760/780 RAS-16UAV-E 550 780 720 39 750 Twin rotary type with DC-inverter variable speed control DA130A1F-24F 43 2410/2410 Flare connection 6. 35 12. 7 6. 35 12. 7 15 15 10 R410A 0. 95 3 Wires: includes earth (Outdoor) 4 Wires: includes earth 21 32 / 0 28 10 43 / 10 24 1 1 1 2 (3. 1 x 16L) 1 1 2 6 (4 x 25L) 1 1 1 The specification may be subject to change without notice for purpose of improvement. [. . . ] Insert the connecting cable (according to the local cords) into the pipe hole on the wall. Take out the connecting cable through the cable slot on the rear panel so that it protrudes about 15 cm from the front. Insert the connecting cable fully into the terminal block and secure it tightly with screws. Tightening torque : 1. 2 Nm (0. 12 kgfm) 7. Secure the connecting cable with the cord clamp. Fix the terminal cover, rear plate bushing and air inlet grille on the indoor unit. 9-2-5. Piping and drain hose installation <Piping and Drain Hose Forming> * Since dewing results in a machine trouble, make sure to insulate both the connecting pipes. (Use polyethylene foam as insulating material. ) Rear right Left Bottom right Right Fig. Die-cutting Front panel slit Cut out the slit on the left or right side of the front panel for the left or right connection and the slit on the bottom left or right side of the front panel for the bottom left or right connection with a pair of nippers. Changing drain hose For left connection, bottom-leftward connection and rear-leftward connection's piping, it is necessary to change the drain hose and drain cap. <How to remove the Drains Cap> Clip drain cap by needle-nose pliers, and pull out. CAUTION Be sure to refer to the wiring system diagram labeled inside the front panel. Pass the pipe through the hole in the wall, and hook 3. When connecting extension drain hose, insulate the the indoor unit on the installation plate at the upper connecting part of extension drain hose with shield hooks. Swing the indoor unit to right and left to confirm that it is firmly hooked up on the installation plate. While pressing the indoor unit onto the wall, hook it at the lower part on the installation plate. Pull the Extension drain hose Inside the room Drain hose indoor unit toward you to confirm that it is firmly hooked up on the installation plate. 9-2-20 Hook here 1 1 Installation plate 2 CAUTION Push (unhook) Hook Arrange the drain pipe for proper drainage from the unit. Improper drainage can result in dew-dropping. This air conditioner has the structure designed to drain water collected from dew, which forms on the back of the indoor unit, to the drain pan. Therefore, do not store the power cord and other parts at a height above the drain guide. Wall Drain guide Fig. 9-2-17 For detaching the indoor unit from the installation plate pull the indoor unit toward you while pushing its bottom up at the specified parts. Space for pipes Push Push Fig. NOTE: Hole should be made at a slight downward slant on the outdoor side. Do not rise the drain hose. [. . . ] Push the hooking claws (10 positions) by hands and fix the claws. Check that all the hooking claws are fixed to the specified positions. Minus screwdriver Hooking claw 84 FILE NO. SVM-04013 No. " Part name Replacement of temperature sensor for servicing only Procedures 1) Cut the sensor 100 mm longer than old one. 2) Cut the protective tube after pulling out it (200 mm). [. . . ]