User manual LG LF53073032D

[. . . ] • Risk of electric shock. Electricity 53W Electricity 24W Existing lamp LED LED (Dimming control) Long life expectancy provides low maintenance cost If used for 12 hours a day, the product can be used for 10 or more years without replacement. Thus, maintenance costs are low, making it an economically sound option. • Please read the Safety Precautions prior to use for your safety. • This manual is intended to prevent product damage and protect the user’s safety. [. . . ] • Risk of accidents such as electric shock and product damage. Do not use if the product has been dropped or exposed to shock. • Risk of product malfunctioning. Converter < 600 x 600 Type > < 300 x 1200 Type > 1 Drill and prepare the ceiling so the hole is smaller than the product. 2 Connect the 3 product cables to the interior wiring of the building. For wire connectors, use standardized products. 3 Rotate the connected product by 20 degrees. Then insert it into the T-bar insertion space. • Make sure that all 4 sides of the product match the T-bar. Must fix the product properly on the ceiling. • Risk of product dropping and causing injury to the user. 2. Product Size Must have at least two or more people working during installation. • Risk of product dropping and causing injury to the user. T: 596/620 M: 620 CAUTION Do not install where it may be exposed to direct sunlight, humidity, or dust. Alcohol Benzene T: 1256 M: 1270 T: 596/620 M: 620 94 T: 94/96 M: 96 T: 296 M: 310 Do not disassemble or arbitrarily remodel the product. Do not use for underwater lighting purposes. (Underwater landscape, searchlight, fishing, events, etc. ) • Risk of fire and electric shocks. If the lamp turns off by itself, do not disassemble the product. Contact your local LGE sales representative for repair. • Risk of electric shock and product malfunctioning. Do not clean the product with inflammable substances such as alcohol, benzene, and acetone that may alter the surface. *Unit: mm T : T -BAR M : M-BAR 4 Place the horizontal product into the T-bar. 5 Ensure the inserted product is horizontal. 6 Once installation is complete, turn on the power switch to check it is operating properly. • After the installation is complete, remove the protective sheet. Check the following before requesting repair service 2. [. . . ] Before installing dimmers, verify the compatible dimmer list with your local LGE sales representative. - + Connection Terminal 10mm AWG. 20-24 follow this procedure shall void this warranty. WARRANTY IS VOID IF PRODUCT IS NOT USED FOR THE PURPOSE FOR WHICH THIS PRODUCT IS MANUFACTURED. NO IMPLIED WARRANTY, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, APPLIES TO THE PRODUCT AFTER THE APPLICABLE PERIOD OF THE EXPRESS LIMITED WARRANTY STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY, EXCEPT AS MENTIONED ABOVE, GIVEN BY ANY PERSON OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BIND LGE. [. . . ]