User manual LG LH-D6230

[. . . ] Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. [. . . ] Press X repeatedly to play Frame-by-Frame. or >) to go to the next chapter/track or to return to the beginning of the current chapter/track. twice briefly to step back to the previous chapter/track. Discs ALL ALL DVD ALL VCD DivX SCAN (m / M) During playback, press SCAN (m or M) repeatedly to select the required scan speed. DVD : 5 steps (X2, X4, X8, X16, X100) DivX disc, Video CD : 4 steps (X2, X4, X8, X16) WMA/MP3, Audio CD : 3 steps (X2, X4, X8) During playback, press REPEAT repeatedly to select a desired repeat mode. DVD Video discs: Chapter/Title/Off Video CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off During playback, each press of A-B button to select point A and point B and repeats a sequence from point A (Starting point) to point B (End point). During playback or pause mode, press ZOOM to enlarge the video image (3 steps). You can move through the zoomed picture using b B v V buttons. If the current DVD title has a menu, the title menu appears on the screen. During playback, press SUBTITLE repeatedly to select a desired subtitle language. DVD ACD VCD MP3 DivX WMA REPEAT ALL A-B DVD VCD ZOOM DVD VCD TITLE DVD DVD MENU (SUBTITLE) DVD DVD DivX (AUDIO language) During playback, press AUDIO repeatedly to hear a different audio language or audio track. (AUDIO channel) SLOW Press AUDIO repeatedly during playback to hear a different audio channel (STER. , LEFT or RIGHT). Pause mode, press SLOW (m or M) to select the required speed. Press v / V to select a track/file then press PLAY or ENTER and playback starts. You can use variable playback functions. Refer to page 14. 0:00:00 Programmed Playback The program function enables you to store your favorite tracks from any disc in the receiver memory. Select a track on the "List", then press PROG. or select " (Add)" icon then press ENTER to place the selected track on the "Program" list. Repeat to place additional tracks on the list. Note: You can add all tracks in the disc. (Add All)" icon 1 / 12 0:00:00 Audio CD List Track1 Track2 Track3 Track4 Track5 Track6 Track7 Track8 1 / 104 JPEG MP3 Program List Music Folder 1 Music Folder 2 Music Folder 3 Music Folder 4 Music Folder 5 Music Folder 6 Music Folder 7 Music Folder 8 Program Tips: Press MENU to move to the next page. On a CD with MP3/WMA and JPEG you can switch MP3/WMA and JPEG. Press TITLE and MUSIC or PHOTO word on top of the menu is highlighted. MP3 / WMA disc compatibility with this player is limited as follows: · Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA) · Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA) · The DVD/CD Receiver cannot read an MP3/WMA file that has a file extension other than ". mp3" / ". wma". · CD-R physical format should be ISO 9660 · If you record MP3 / WMA files using software that cannot create a file system (eg. [. . . ] · Cancel the Rating function or change the rating level. · Connect the speakers and components securely. · Move your TV away from the audio components. · The TV is not set to receive DVD signal output. · The video cable is not connected securely. · The connected TV power is turned off. [. . . ]