User manual LG LM-2430C2L

[. . . ] Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the unit, unplug the unit from the outlet. [. . . ] To change the password, press ENTER when the "Change" option is highlighted. Enter it again and press ENTER to verify. If you forget your password If you forget your password, you can clear it using the following steps: 1. Input the 6-digit number "210499" and press ENTER. Select the first character using v / V buttons. Press B and select the second character using v / V buttons. Press ENTER to confirm your Area code selection. OTHERS DivX(R) Registration Select Move Select DivX(R) Registration We provide you the DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos based on the DivX® VOD service. For more information, visit www. divx. com/vod. Select "DivX(R) Registration" option and then press B. Press ENTER while "Select" is selected and the registration code will appear. Use the registration code to purchase or rent the videos from DivX® VOD service at www. divx. com/vod. If you load a disc that has the scene memorized, the scene is automatically recalled. Note: This receiver does not memorize the scene of a disc if you switch off the receiver before commencing to play the disc. To start playing at any chosen time on the disc: 1. Press v / V to select the time clock icon and "--:--:--" appears. Input the required start time in hours, minutes, and seconds from left to right. If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Marker Search DVD DivX To enter a Marker To Recall or Clear a Marked Scene 1. The marker search menu appears on the screen. Within 10 seconds, press b / B to select a marker number that you want to recall or clear. Press ENTER and playback starts from the marked scene. Or press CLEAR and the marker number is erased from the list. You can play any marker by inputting its number on the marker search menu. 17 Operation You can start playback from up to nine memorized points. [. . . ] · No stations have been preset or preset stations have been cleared (when tuning by scanning preset stations). The remote control does not work properly. · The remote control is not pointed at the remote sensor of the DVD/CD Receiver. · The remote control is too far from the DVD/CD Receiver. [. . . ]