User manual LG LM50-CUQZ

[. . . ] Microsoft, MS-DOS, Windows, and Windows NT are trademarks of Microsoft Corporation in the United States and other countries. All other product names mentioned herein may be trademarks of their respective companies. Compaq service tool software, including associated documentation, is the property of and contains confidential technology of Compaq Computer Corporation. [. . . ] Service customer is hereby licensed to use the software only for activities directly relating to the delivery of, and only during the term of, the applicable services delivered by Compaq or its authorized service provider. Customer may not modify or reverse engineer, remove, or transfer the software or make the software or any resultant diagnosis or system management data available to other parties without Compaq's or its authorized service provider's consent. Upon termination of the services, customer will, at Compaq's or its service provider's option, destroy or return the software and associated documentation in its possession. Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided "as is" without warranty of any kind and is subject to change without notice. The warranties for Compaq products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty. Å Ä WARNING: Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. Evo Desktop Family Evo Workstation Family Deskpro Workstations Network Communications Guide Third Edition (September 2001) Part Number: 177922-003 Contents Network Communications Guide NIC-Based Alerts . Full-duplex systems can transmit and receive information on the network simultaneously. Half-duplex systems cannot transmit and receive simultaneously. If necessary, you can disable the autosensing capabilities and force the system to operate in one mode only. Select the Network icon, located in the Control Panel. Select the appropriate NIC in the list box and click Properties. Change the Speed and Duplex values from Automatic/Auto Duplex to the appropriate values, depending on the capabilities of your network. You will be prompted to restart your computer for the changes to take effect. [. . . ] Change the Speed and Duplex values from Automatic/Auto Duplex to the appropriate values, depending on the capabilities of your network. You will be prompted to restart your computer for the changes to take effect. Refer to the documentation provided with the network controller for additional information. 100Base-TX operation requires the use of Category 5 UTP cable with an RJ-45 network connection. Network Communications Guide 3 Network Communications Guide Installing Network Drivers The device drivers in the network software enable the computer to communicate with the network. [. . . ]