User manual LG LMNC186BTG0.ANWADXB

[. . . ] Ce manuel dcrit la procdure d'installation de l'unit intrieure. Pour installer l'unit extrieure, reportez-vous au Manuel d'installation fourni avec l'unit extrieure. Bitte lesen Sie dieses Handbuch sorgfltig, bevor Sie mit der Installation des Klimagertes beginnen. In diesem Handbuch wird die Installation der Raumeinheit beschrieben. [. . . ] 50 PRUEBA DE FUNCIONAMIENTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 NDICE Acessrios e peas adquiridas localmente . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 1 PRECAUES DE SEGURANA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 2 PREPARAO PARA INSTALAO DO KIT DE DRENAGEM ASCENDENTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 3 PROCEDIMENTO DE INSTALAO DO KIT DE DRENAGEM ASCENDENTE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 4 5 6 7 INSTALAO DA TUBAGEM DE DRENAGEM . . . . . . . . . . . . . . . . . . . . . . 59 ISOLANTE TRMICO PARA PLACA DO TECTO . . . . . . . . . . . . . . . . . . . 59 LIGAO DE CABOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 ENSAIO DE FUNCIONAMENTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 INHOUD Accessoires en niet meegeleverde onderdelen . . . . . . . . . . . . . . . . . . . . . . . . . 61 1 VOORZORGSMAATREGELEN VOOR UW VEILIGHEID . . . . . . . . Therefore, during installation work, be sure that water, dust, former refrigerant, or refrigerating oil does not enter the refrigerating cycle. To prevent charging an incorrect refrigerant and refrigerating oil, the sizes of connecting sections of charging port of the main unit and installation tools are charged from those for the conventional refrigerant. Accordingly the exclusive tools are required for the new refrigerant (R410A). For connecting pipes, use new and clean piping designed for R410A, and please care so that water or dust does not enter. Moreover, do not use the existing piping because there are problems with pressure-resistance force and impurity in it. CAUTION To Disconnect the Appliance from Main Power Supply. This appliance must be connected to the main power supply by means of a switch with a contact separation of at least 3 mm. The installation fuse (25A D type ) must be used for the power supply line of this conditioner. WARNINGS Ask an authorized dealer or qualified installation professional to install/maintain the air conditioner. Inappropriate installation may result in water leakage, electric shock or fire. Turn off the main power supply switch or breaker before attempting any electrical work. Make sure all power switches are off. Failure to do so may cause electric shock. Connect the connecting cable correctly. If the connecting cable is connected in a wrong way, electric parts may be damaged. When moving the air conditioner for the installation into another place, be very careful not to enter any gaseous matter other than the specified refrigerant into the refrigeration cycle. If air or any other gas is mixed in the refrigerant, the gas pressure in the refrigeration cycle becomes abnormally high and it resultingly causes pipe burst and injuries on persons. Do not modify this unit by removing any of the safety guards or by by-passing any of the safety interlock switches. Exposure of unit to water or other moisture before installation may cause a short-circuit of electrical parts. Do not store it in a wet basement or expose to rain or water. 2 ENGLISH 1 1 PRECAUTIONS FOR SAFETY After unpacking the unit, examine it carefully if there are possible damage. Do not install in a place that might increase the vibration of the unit. To avoid personal injury (with sharp edges), be careful when handling parts. Perform installation work properly according to the Installation Manual. Inappropriate installation may result in water leakage, electric shock or fire. When the air conditioner is installed in a small room, provide appropriate measures to ensure that the concentration of refrigerant leakage occur in the room does not exceed the critical level. [. . . ] Inappropriate piping work may result in water leakage in the room and wet of furniture. Heat insulator REQUIREMENT Be sure to perform heat insulation of the drain pipes of the indoor unit. Never forget to perform heat insulation of the connecting part with the indoor unit. An incomplete heat insulation causes dewing. Set the drain pipe with downward slope (1/100 or more), and do not make swelling or trap on the piping. [. . . ]