User manual LG LMV1630ST

[. . . ] Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] Use / to select the Speaker Setup option then press to move to the third level. Press SELECT/ENTER and 5. 1 Speaker Setup menu appears. Press SELECT/ENTER to confirm your selection. Speaker Select a speaker that you want to adjust. [Front speaker (Front L), Front speaker (Front R), Center Speaker (Center), Subwoofer (Woofer), Rear speaker (Rear L), Rear speaker (Rear R)] ote Certain speaker settings are prohibited by the Dolby Digital licensing agreement. With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing dialog intelligibility. Notes · The DRC function works only during playback of Dolby Digital recorded discs. · The level of Dynamic Range Compression may differ depending on the DVD disc. Vocal DVD Set Vocal to On only when a multi-channel Karaoke DVD is playing. The karaoke channels on the disc will mix into a normal stereo sound. 16 Before Operation LOCK (Parental Control) LOCK Rating Password Area Code Unlock Password (Security Code) You can enter or change password. **** RU AE Move Select If you forget your Security Code If you forget your security code you can clear it using the following steps: 1 Select Password on the LOCK menu. 2 Input the 6-digit number "210499" on the setup menu and the security code is cleared. 3 Enter the new 4-digit code, then press SELECT/ENTER. 4 Press SETUP to exit the menu. Before Operation OTHERS OTHERS PBC DivX(R) Registration On Select Operation with DVD and Video CD Playing a DVD and Video CD Playback Setup DVD VCD · Turn on the TV and select the video input source connected to the unit. · Audio system: Turn on the audio system and select the input source connected to the unit. Select Move PBC VCD Set Playback Control (PBC) to On or Off. On:Video CDs with PBC are played according to the PBC. Off:Video CDs with PBC are played the same way as Audio CDs. 1 Press ZOP. /CL. chosen disc in the 2 Load yourside facing down. tray, with the playback Press Z button to close the tray. If playback does not starts start, press PLAY. In some cases, the disc menu might appear instead. DivX(R) Registration DivX You can show the DivX DRM (Digital Right Management) Registration code for your unit only. Your registration code is : XXXXXXXX Please use this code to register this player with the DivX(R) Video On Demand service. This will allow you to rent and purchase videos using the DivX(R) Video On Demand format. To learn more go to www. divx. com/vod If a menu screen is displayed The menu screen may be displayed first after loading a DVD or Video CD which contains a menu. DVD Use the / / / buttons to select the title/chapter you want to view, then press SELECT/ ENTER to start. Press TITLE or MENU to return to the menu screen. VCD The Registration code is used for VOD (Video-OnDemand) service agent. [. . . ] · The remote control is not pointed at the remote sensor of the unit. · The remote control is too far from the unit. · There is an obstacle in the path of the remote control and the unit. · The batteries in the remote control are exhausted. [. . . ]