User manual LG LMVM2075SB

[. . . ] In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs. Press the POWER button on the front panel or side panel to turn off the TV when the TV set is not being used for a long time. It is recommended to remove the plug from the wall outlet(Power point). DISCONNECTING DEVICE FROM MAINS Mains plug is the disconnecting device. The plug must remain readily operable Power this may cause a fire or could give an electric shock. Service Never remove the back cover of the set as this can expose you to very high voltage and other hazards. [. . . ] Note : What is shown here may be somewhat different from your set or can not be supplied on your area. PR 5 6 1. NUMBER BUTTONS switches the set on from standby or directly select a number. D / E (Programme Up/Down) selects a programme or a menu item. F / G (Volume Up/Down) adjusts the volume. OK accepts your selection or displays the current mode. POWER switches the set on from standby or off to standby. Q. VIEW returns to the previously viewed programme. LIST displays the programme table. 3 Basic operation On and off 1. Press the main power button to switch the set on. If the set is in standby mode, press the POWER, D / E, TV/AV or NUMBER buttons on the remote control handset to switch it on fully. Press the POWER button on the remote control handset. The display r- - - will appear on the screen, followed by 10, 20, 30, 60, 90, 120, 180 and 240. The timer begins to count down from the number of minutes selected. To view the remaining sleep time, press the SLEEP button once. To cancel the sleep time, repeatedly press the --SLEEP button until the display r appears. When you switch the set off, the set releases the preset sleep time. AV or AV1 : VCR connected to the Euro scart socket or phone jack of the set AV2 : VCR connected to the AV IN 2 sockets on the set. (option) COMPONENT : DVD Player connected to the COMPONENT sockets on the set. (option) Alternatively you can select the TV or AV mode by pressing the TV/AV button. In AV mode, to return to TV mode, press the D / E or NUMBER buttons. Auto AV switching (option) If your VCR outputs switching voltage when it is switched to playback with the VCR connected to the Euro scart socket. The set is automatically switched to A or A V V1 mode when an AV signal is input. But if you want to keep on watching TV mode, press the 4 On screen menus The dialogue between you and your set takes place on screen with an operator menu. The buttons required for the operating steps are also displayed. Setting up TV stations Auto programme tuning All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set. [. . . ] Move the programme to the desired programme number with the D / E or F / G button. Press the YELLOW button again to release this function. Select a programme number to be skipped with the D / E or F / G button. Press the BLUE button again to release the skipped programme. [. . . ]